Model No. English TX-40AS640B TX-48AS640B TX-55AS640B Operating Instructions LCD Television For more detailed instructions, refer to [eHELP] (Built-in Operating Instructions). ● How to use [eHELP] (p. 17) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only.
Contents Be Sure to Read Important Notice··················································· 3 Safety Precautions ··············································· 3 Quick Start Guide Accessories ························································ 7 Connections ························································ 8 Identifying Controls ··············································12 First time Auto Setup ············································15 Using your VIERA Operations ···················
Important Notice Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2013) of digital services. ● Not all the features are available depending on the country, area, broadcaster, service provider and network environment. ● The compatibility with future services is not guaranteed. ● Check the latest information on the available services at the following website. http://panasonic.
● This TV is designed to operate on AC 220-240 V, 50 / 60 Hz. ● Insert the mains plug fully into the socket outlet. ● Ensure that the mains plug is easily accessible. ● Disconnect the mains plug when cleaning the TV. ● Do not touch the mains plug with wet hands. ● Do not damage the mains lead. • Do not place a heavy object on the lead. • Do not place the lead near a high temperature object. • Do not pull on the lead. Hold onto the mains plug body when disconnecting the plug.
■ Radio wave Warning ● Do not use the TV, 3D Eyewear and Touch Pad Controller in any medical institutions or locations with medical equipment. Radio waves may interfere with the medical equipment and cause accidents due to the malfunction. ● Do not use the TV, 3D Eyewear and Touch Pad Controller near any automatic control equipment such as automatic doors or fire alarms. Radio waves may interfere with the automatic control equipment and cause accidents due to the malfunction.
● Remove the battery from the unit when not using for a prolonged period of time to prevent battery leakage, corrosion and explosion. ■ 3D Eyewear Use Caution ● Use the 3D Eyewear only for the intended purpose and nothing else. ● Do not move around while wearing the 3D Eyewear to avoid falling or accidental injury. ● Do not drop, bend, exert pressure on, or step on the 3D Eyewear. ● Be careful of the tips of the frame when putting on the 3D Eyewear.
Accessories Assembling / Removing the pedestal A Assembly screw (4) Remote Control M5 × 15 (p. 12) ● N2QAYB000829 B Assembly screw (4) M4 × 12 Touch Pad Controller C Bracket (2) (p. 13) ● N2QBYA000004 Pedestal D Base (p. 7) Mains lead ■ Assembling the pedestal (p. 9) Batteries ● R6 (2) A 1 C D (For Remote Control) (p. 12) ● R03 (2) (For Touch Pad Controller) (p. 14) 3D Eyewear (2) (p.
Connections ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ● Check the terminal type and cable plugs are correct when connecting. ● Use a fully wired HDMI compliant cable. 2 ● Use a fully wired SCART cable. ● Keep the TV away from electronic equipment (video equipment, etc.
8 Terrestrial terminal (p. 9) AV devices 9 DIGITAL AUDIO 10 HDMI1 - 2 ■ DVD Recorder / VCR (p. 9, 10, 11) TV Basic connections ■ Mains lead AC 220-240 V 50 / 60 Hz Mains lead (supplied) Insert the mains plug firmly into place. ● When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
Network Other connections To use internet service, you need a broadband network environment. ● If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the internet environment for wired connection or wireless connection. ● Setup of the network connection will start when first using the TV. (p.
■ Amplifier (to listen with speakers) ● Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio Return Channel) function. ● For more information, refer to [eHELP] (Functions > Common Interface), read the manual of the CI module, or check with the content provider. TV As for an amplifier without ARC function, use DIGITAL AUDIO. ● To enjoy multi-channel sound from external equipment (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier.
Identifying Controls 8 [Option Menu] ● Easy optional setting for viewing, sound, etc. 9 Coloured buttons Remote Control (red-green-yellow-blue) ● Used for the selection, navigation and operation of various functions. 10 Volume Up / Down 11 Numeric buttons ● Changes channel and teletext pages. ● Sets characters. ● When in Standby mode, switches TV on. 12 [eHELP] ● Displays [eHELP] (Built-in Operating Instructions). 13 Input mode selection ● TV - switches to DVB / Analogue mode.
Touch Pad Controller Touch Pad Controller is designed for the convenient operations, especially, on Home Screen or internet contents. You can operate the TV intuitively with this controller. ● Touch Pad Controller can be used by registering to this TV with Bluetooth wireless technology. The registration starts automatically when you press any buttons (except Standby On / Off switch) after installing batteries.
■ Installing / Removing batteries Indicator / Control panel ● When pressing 4, 5, 6 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button. Slide open 4 5 6 1 7 2 3 Close Rear side of the TV Note the correct polarity (+ or -) Note ● It is recommended to hold Touch Pad Controller with your hand when using.
First time Auto Setup Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 8 - 11) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
Operations Turn power on ● You can also select the mode pressing the TV button repeatedly. ● If [TV Selection] is not displayed, press the TV button to switch the mode. 3 (TV) Select a channel up or down (Remote Control) ● Mains power On / Off switch should be on. (p. 14) ● The last viewed [Home Screen] is displayed. or Example: [TV Home Screen] ● DVB channel position begins from number 1 upward. Analogue channel position numbers are in the 0 - 99 range.
How to Use eHELP Viewing 3D images [eHELP] is the detailed operating instructions built into the TV, and helps you to get more understanding of the operations for each feature. You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear (supplied). ● The 3D Eyewear must be worn to view 3D images.
To view the 3D images ■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format) ● Connect the 3D-compatible player via a fully wired HDMI compliant cable. (If you use the non 3D-compatible player, the images will be displayed in 2D mode.) ● If the input mode is not switched automatically, select the input mode connected to the player using the AV button. ■ 3D-supported broadcast ● Please consult the suppliers of contents or programmes for availability of this service.
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. ● For more information, refer to [eHELP] (Support > FAQs). The TV does not switch on ● Check the mains lead is plugged into the TV and the socket outlet. ● The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p. 3) The TV goes into Standby mode ● Auto power standby function is activated.
Maintenance Specifications First, remove the mains plug from the socket outlet. ■ TV Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: (1) First clean the dust on the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring the cloth firmly. (Please note liquids do not enter the TV inside.
AUDIO L - R RCA PIN Type × 2 M.NTSC Playback from M.NTSC Video recorders (VCR) 0.5 V[rms] Y NTSC (AV input only) 1.0 V[p-p] (including synchronisation) PB/CB, PR/CR ±0.35 V[p-p] HDMI 1 / 2 / 3 input TYPE A Connectors HDMI1 / 3: 3D, Content Type HDMI2: 3D, Content Type, Audio Return Channel ● This TV supports “HDAVI Control 5” function. Card slot Common Interface slot (complies with CI Plus) × 1 ETHERNET RJ45, IEEE802.
Battery Coin-shaped lithium battery CR2025 Operation time Approx. 75 hours in continuous use of the battery made by Panasonic Materials Main body Resin Lens section Liquid crystal glass Note ● 3D Eyewear and Touch Pad Controller use Bluetooth wireless technology. ● Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. ● For the information of power consumption, display resolution, etc., please refer to Product fiche.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.