Operating Instructions

English
13
 Common Interface

Turn the TV off with Mains Power On / Off switch
whenever inserting or removing the CI module.

If a smart card and a CI module come as a set, first
insert the CI module, then insert the smart card into
the CI module.

Insert or remove the CI module completely in the
correct direction as shown.

Normally encrypted channels will appear. (Viewable
channels and their features depend on the CI
module.)
If encrypted channels do not appear
[Common Interface] in the Setup Menu

There might be some CI modules in the market
with older firmware versions that do not work fully
interoperable with this new CI+ v1.3 TV. In this case,
please contact your content provider.

For details, refer to [eHELP] (Functions > Common
Interface), read the manual of the CI module, or
check with the content provider.
TV
CI module
 USB HDD (for recording)

Use USB 3 for connecting the USB HDD.

For details, refer to [eHELP] (Recording).
 VIERA Link

Use HDMI1 - 3 for VIERA Link connection.

For details, refer to [eHELP] (Functions > VIERA Link
“HDAVI Control™”).
Using the cable tie (supplied)

Do not bundle the Satellite cable, RF cable and mains
lead together (could cause distorted image).

Fix cables with the cable tie as necessary.

When using the optional accessory, follow the option’s
assembly manual to fix cables.
Attach the cable tie
Insert the cable tie in a hole
Hole
Bundle the cables
Hooks
Set the tip in the hooks
To loosen:
Knob
Keep pushing the knob
To remove from the TV:
Keep pushing both side snaps
Snaps