Operating Instructions
DVB-via-IP Server Settings
EX730 series
■ Preparations
●
Ensure the network connections and network settings are completed.
Functions > DVB-via-IP > DVB-via-IP server connection
Network > Network settings
●
Ensure that Dual Tuner Mode is set to On in LNB Configuration.
Watching > Tuning and editing channels > Auto Setup
■ DVB-via-IP Server Settings
Selects TV signal and enables tuning in DVB-via-IP server function.
1. Display the menu with MENU.
2. Select Network > DVB-via-IP Server Settings and press OK to access.
3. Select DVB-S / DVB-C / DVB-T and press OK to set.
●
Selectable TV modes for client vary depending on the channels stored.
Watching > Tuning and editing channels > Auto Setup
4. Select Enable DVB-via-IP server and press OK to access.
5. A confirmation screen is displayed and press OK to set. (The TV
automatically restarts.)
●
Changing the default configuration may result in higher energy
consumption of the product.
●
LED turns to orange in Standby mode when this function is active.
= Note =
●
Dual tuner function (watching or recording 2 programmes simultaneously,
watching a programme while recording another programme, etc.) is not
available while using DVB-via-IP server function.
●
This function is not available when the TV is turned off with Mains Power
On / Off switch.
●
Due to network conditions or certain broadcaster restrictions, this function
may not be available.
- 229 -