Operating instructions

Touch Pad Controller does not work or cannot be registered
●
Are the batteries installed correctly?
●
The batteries may be running low. Replace them with new ones.
●
Register again.
Functions > Touch Pad Controller > Settings
●
Use Touch Pad Controller within approx. 3.2 m from the TV. (The range
may be shortened depending on the obstacle between the TV and the
controller, or the surrounding environment.)
Voice Control function does not work
●
Voice Control function may not work properly depending on the
pronunciation, noise and network environment.
●
For details of the Voice Control function
Functions > Voice Control
LED does not turn to red in Standby mode
●
LED turns to orange in Standby mode in the following conditions:
– Recording is in progress.
– Timer Programming is set.
– DLNA Server is set to On.
– Powered On by Apps is set to On.
– Home Streaming is set to Always.
– Powered On by Easy Mirroring is set to On.
– DVB-via-IP Server Settings is set to Enable DVB-via-IP server.
●
LED turns to orange during adjustment of the panel (approx. 10 minutes to
maximum 80 minutes). LED turns to orange again in standby mode when
the TV is turned on / off before the panel adjustment is completed. (Be
sure to turn the TV off with the remote control to adjust the panel.)
When pushed with a finger, the display panel moves slightly and makes a
noise
●
There is a little gap around the panel to prevent damage to the panel. This
is not a malfunction.
- 339 -