Operating Instructions

English
16
 Subwoofer

To use the subwoofer, set [Headphone Terminal
Output] to [Sub Woofer]. (The subwoofer output from
the TV is the same for both L and R.)

For information about the headphone terminal output
settings, refer to [eHELP] (Search by Purpose >
Settings > Sound).
TV
Audio cable (3.5 mm stereo mini
plug - audio pin plug)
 Common Interface

Turn the TV off with Mains Power On / Off switch
whenever inserting or removing the CI module.

If a smart card and a CI module come as a set, first
insert the CI module, then insert the smart card into
the CI module.

Insert or remove the CI module completely in the
correct direction as shown.

Normally encrypted channels will appear. (Viewable
channels and their features depend on the CI
module.)
If encrypted channels do not appear
[Common Interface] in the Setup Menu

There might be some CI modules in the market
with older firmware versions that do not work fully
interoperable with this new CI+ v1.4 TV. In this case,
please contact your content provider.

For details, refer to [eHELP] (Search by Purpose >
Functions > Common Interface), read the manual of
the CI module, or check with the content provider.

Be sure to remove the CI module card, etc. before
repairing, transferring or discarding.
TV
CI module
 USB HDD (for recording)

Use USB 1 port for connecting the USB HDD.

For details, refer to [eHELP] (Search by Purpose >
Recording).
 VIERA Link

Use HDMI1 - 4 for VIERA Link connection.

For details, refer to [eHELP] (Search by Purpose >
Functions > VIERA Link “HDAVI Control™”).
Cable arrangement
Fix the cables using the cable clamp, cable tie, etc. and
then attach the terminal cover / rear cover to the TV.
 Fixing the cables using the cable tie
Attach the cable tie
Insert the cable tie in a hole
Hole
Bundle the cables
Hooks
Set the tip in the hooks
To loosen:
Knob
Keep pushing the knob