Operating Instructions

Overcurrent error message appears
●
The connected USB device may cause this error. Remove the device and
turn the TV off with Mains Power On / Off switch, then turn it on again.
●
Check foreign objects are not inside the USB port.
An error message appears
●
Follow the message’s instructions.
●
If the problem persists, contact your local Panasonic dealer or the
authorised service centre.
Voice Control function does not work
●
Confirm the remote control is paired with this TV and the name of remote
control is displayed on Accessories in Settings. If the remote control is not
displayed, set Pairing Start in Remote Control.
Functions > Voice Control > Pairing
●
Voice Control function may not work properly depending on the
pronunciation, noise and network environment.
●
Check the connections and settings.
Network > Network connections
Network > Network settings
●
For details of the Voice Control function
Functions > Voice Control
LED does not turn to red in Standby mode
●
LED turns to orange in Standby mode in the following conditions:
– Recording is in progress.
– Timer Programming is set.
When pushed with a finger, the display panel moves slightly and makes a
noise
●
There is a little gap around the panel to prevent damage to the panel. This
is not a malfunction.
- 181 -