Quick Start Guide

22
English
≥ When pressing 4, 5, 6 buttons, the control panel guide
appears on the right side of the screen for 3 seconds
to highlight which button has been pressed.
1Power LED
≥ The LED blinks when an infrared signal is received
from the remote control.
2 Ambient sensor
≥ Senses ambient lighting conditions to adjust the
picture when [Auto Brightness] and [Auto White
Balance] (Picture > Ambient Sensor Settings) are
set to [On].
3 Remote control signal receiver (for infrared
communication)
≥ Do not place any objects between the TV remote
control signal receiver and remote control.
4 Input mode selection
≥ Press repeatedly until you reach the desired mode.
Menu
≥ Press and hold for about 3 seconds to display the
menu bar.
OK (when in the menu system)
5 Channel Up / Down
≥ Cursor Up / Down (when in the menu system)
6 Volume Up / Down
≥ Cursor Left / Right (when in the menu system)
7 Mains power On / Off switch
≥ Use to switch the mains power.
≥ To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.
≥ [ ]: Standby / On
First time Auto
Setup
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
≥ These steps are not necessary if the setup has been
completed by your local dealer.
≥ Please complete connections (p. 13 - 16) and settings
(if necessary) of the connected equipment before
starting Auto Setup. For information about the settings
for the connected equipment, read the manual of the
equipment.
1 Plug the TV into a live mains socket
and turn the power on
≥Takes a few seconds to be displayed.
2 Select the following items
Set up each item by following the on-screen instructions.
Example:
∫ How to use the remote control
Select the language
Select your country
Select [Home]
Select [Home] for use in a home viewing environment.
≥ [Shop] is for shop display.
≥ To change the viewing environment later on, the set
will need to have all settings initialised by accessing
[Shipping Condition].
Indicator / Control panel
Red: Standby
Green: On
• Depending on the ambient brightness,
adjusts the brightness of LED to easy-
to-view levels automatically.
Orange: Standby with some functions (recording,
etc.) active
1 2, 3
5
6
7
4
Rear side of the TV
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Please select your viewing environment.
ShopHome
TX-43_49_55_65LXx97x_TQB4GA0125_eng.book 22 ページ ２０２２年１月７日 金曜日 午後１時９分