Operating Instructions

Table Of Contents
Audio Bit Rate:
Sets to High normally when using two audio devices simultaneously.
High: High sound quality
Low: High connectivity of sound
When Dual Audio is set to On, Audio Bit Rate is set to Low
automatically. (High can be selected manually.)
When Dual Audio is set to Off, Audio Bit Rate is set to High
automatically. (Low can be selected manually.)
Setting to Low may resolve the sound interruption.
Settings in the Sound Menu may not be effective for the Bluetooth audio
devices.
To use Audio Link
1) Display Home with HOME.
2) Select Apps and press OK to access.
3) Select Audio Link and press OK to access.
4) Follow the on-screen instructions.
This setup is not designed for the remote control supporting Bluetooth
wireless technology.
For secure connection, it is recommended to use a device supporting
Bluetooth 4.2 or later. The encryption type depends on the connected
device.
If using the 2.4 GHz band on the wireless router, simultaneous use with
Bluetooth device may result in connection interruptions. If your wireless
router supports 5 GHz band, try using the 5 GHz band. If you have a wired
LAN connection, try using the wired LAN connection.
Also try to set Unpair in Remote Control Settings to cancel the pairing and
delete the Bluetooth remote control information. (Voice control function
using the microphone of the remote control is only disabled.)
Functions > Voice Control > Settings
If the sound interruption occurs, place Bluetooth device closer to the TV.
When a Bluetooth device is connected to the TV, it is possible that the
Bluetooth audio output may not be synchronised (i.e. be delayed) with
relation to the images on the screen. This is not a defect of the TV or the
device. The delay time will differ depending on the device.
- 288 -