Operating Instruction
English - 5 -
When using the
wall-hanging bracket
Please contact your local Panasonic dealer to
purchase the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation;
Rear of the TV
a
b
55” 65”
a (mm) 200 400
b (mm) 200 200
View from the side
c
VESA
Bracket
d
(d)
55” 65”
Depth of screw (c)
min. 8 mm 15 mm
max. 12 mm 20 mm
Diameter M6 M6
Note: The screws for xing the TV onto the wall-hanging
bracket are not supplied with the TV.
Assembling / Removing
the pedestal
Preparations
Take out the pedestal(s) and the TV from the packing
case and put the TV onto a work table with the screen
panel down on the clean and soft cloth (blanket, etc.)
Do not hold the screen panel part.
Make sure not to scratch or break the TV.
CAUTION: Please refrain from inserting pictured screws to
the TV body when not using the TV stand e.g. wall hanging.
Inserting screws without pedestal may cause a damage of
the TV.
Assembling the pedestal
6. Place the stand(s) on the stand mounting
pattern(s) on the rear side of the TV.
7. Insert the screws (M4 x 15) provided and tighten
M4x15
x4
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking
the TV.
Put the TV onto a work table with the screen panel
down on the clean and soft cloth. Leave the stand(s)
protruding over the edge of the surface.
Remove the stand(s).