Operating Instructions

English
14
 Common Interface

Turn the TV off with Mains Power On / Off switch
whenever inserting or removing the CI module.

If a smart card and a CI module come as a set, first
insert the CI module, then insert the smart card into
the CI module.

Insert or remove the CI module completely in the
correct direction as shown.

Normally encrypted channels will appear. (Viewable
channels and their features depend on the CI
module.)
If encrypted channels do not appear
[Common Interface] in the Setup Menu

There might be some CI modules in the market
with older firmware versions that do not work fully
interoperable with this new CI+ v1.3 TV. In this case,
please contact your content provider.

For details, refer to [eHELP] (Functions > Common
Interface), read the manual of the CI module, or
check with the content provider.
TV
CI module
 USB HDD (for recording)

Use USB 3 port for connecting the USB HDD.

For details, refer to [eHELP] (Recording).
 VIERA Link

Use HDMI1 - 4 for VIERA Link connection.

For details, refer to [eHELP] (Functions > VIERA Link
“HDAVI Control™”).
Cable arrangement
Fix the cables using the cable clamp and cable guide,
and then attach the cable cover to the TV.
 Attaching the cable guide
1
2
Cable guide
 Removing the cable guide
Remove the cable guide in the reverse order of
assembly.
 Fixing the cables using the cable clamp and
cable guide
1
2
Open
Close
Cable clamp