Operating Instructions
Other
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
HDMI CEC function does not work and an error message appears
●
Check the connections.
Functions > HDMI CEC > CEC connection
●
Turn the connected equipment on and then switch the TV on.
Parts of the TV become hot
●
Parts of the TV may become hot. These temperature rises do not pose
any problems in terms of performance or quality.
Overcurrent error message appears
●
The connected USB device may cause this error. Remove the device and
turn the TV off with Mains Power On / Off switch, then turn it on again.
●
Check foreign objects are not inside the USB port.
An error message appears
●
Follow the message’s instructions.
●
If the problem persists, contact your local Panasonic dealer or the
authorised service centre.
LED does not turn to red in Standby mode
●
LED turns to orange in Standby mode in the following conditions:
– Recording is in progress.
– Schedule List is set.
- 177 -