Operating Instructions

Automatic channel search
Automatically retunes the channels received in the area.
●
All the previous tuning settings are erased.
●
Child Lock PIN number is required to retune locked channels.
Functions > Child Lock > PIN number
●
If tuning has not been done completely, set Single RF Scan.
Watching > Tuning and editing channels > Single RF Scan
1. Select Automatic channel search and press OK to access.
2. A confirmation screen is displayed and press OK to start Automatic
channel search. (Settings are made automatically.)
●
Satellite Re-scan is displayed instead of Automatic channel search when
the tuning mode is the satellite mode.
●
If no satellite channel is found, set LNB frequency in Antenna setup to suit
your environment.
●
Set Add Analog to On to scan the analogue channels.
Watching > Tuning and editing channels > Other Settings
- 66 -