Operating Instructions
Table Of Contents
- Read first
- Home
- Watching
- Recording
- Media Player
- Network
- Internet content
- Home network
- Network connections
- Network settings
- Network Connection
- Custom - Wireless
- Custom - Wired
- Custom - Wireless Access Point
- Network Status
- TV Name
- TV Remote App Settings
- Network Link Settings
- Smart Speaker Settings
- Mirroring Settings
- Control4 Settings
- VOD Content Refresh
- Software Update
- New Software Message
- IPv6
- Terms of Service and Settings
- Samba Interactive TV Settings
- Photos
- Videos
- Music
- Supported format
- Functions
- Settings
- Support
Advanced settings
1. Display the menu with MENU, select Main Menu and press OK to access.
2. Select Sound and press OK to access.
3. Select one of the following items and press OK to access.
NICAM / Audio Preference / AV Sync / SPDIF Selection / HDMI Audio
Format / PCM Optical Level / eARC / SPDIF Delay / HDMI Input
4. Set the item and press OK to store.
NICAM
(On / Off)
Near Instantaneous Companded Audio Multiplex
Reproduces NICAM stereo sound.
●
Set to Off if reception is poor. (FM monaural sound)
●
For Analogue
Audio Preference
(Multichannel / Stereo / MPEG)
Selects the initial setting for audio tracks.
Multichannel:
The priority is given to multi-channel audio track.
Stereo:
The priority is given to stereo (2ch) audio track.
MPEG:
The priority is given to MPEG.
●
MPEG is an audio compression method that compresses audio to the
smaller size without any considerable loss of audio quality.
●
For digital
●
Ireland only
AV Sync
(On / Off)
Delays the video signal to adjusts the output timing difference between video
and audio outputs.
●
The output timing difference between video and audio outputs may not be
adjusted correctly depending on the input signal and audio device used.
- 113 -