Operating Instructions
- 82 -
3D Settings
1. Display the menu with MENU.
2. Select Picture > 3D Settings with
/ and press OK to access.
3. Select one of the following items with
/ and press OK to access.
3D Detection / 3D Signal Message / 2D→3DDepth / 3D Adjustment /
L/R Picture Swap / Edge Smoother / Safety Precautions
4. Set with
/ and press OK to store.
●
To exit the menu screen
EXIT
3D Detection
(On (Advance) / On / Off)
Selects whether to switch to the 3D mode automatically or not.
On (Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
●
To view 3D images without any notifications and operations, set to On
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
●
Not valid when 3D Detection is set to On (Advance)
●
For DVB, Component and HDMI input
2D→3DDepth
(Max / Mid / Min)
Selects a level of 3D-image depth for viewing converted 2D images.