Model No. English TX-65CZ952B Operating Instructions OLED TV For more detailed instructions, please refer to [eHELP] (Built-in Operating Instructions). ● How to use [eHELP] (p. 18) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use. The images shown in this manual are for illustrative purposes only.
● For information about the trademarks, refer to [eHELP] (Support > Licence).
Important Notice Do not display any still part of the image for a long period In such cases the still part of the image remains dimly on the screen (“image retention”). This is not considered a malfunction and is not covered by the warranty.
Safety Precautions To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below: ■■Mains plug and lead If you detect anything unusual, immediately switch off the mains supply switch and remove the mains plug. •• Do not place the lead near a high temperature object. •• Do not pull on the lead. IMPORTANT: THE MOULDED MAINS PLUG FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
● Do not lay down the TV on a desk or table. ● Do not disassemble or alter the TV and Touch Pad Controller in any way. ■■Built-in wireless LAN Caution To prevent the spread of fire, keep candles or other open flames away from this product at all times ■■Suffocation / Choking Hazard Warning ● The packaging of this product may cause suffocation, and some of the parts are small and may present a choking hazard to young children. Keep these parts out of reach of young children.
■■Moving the TV Caution Before moving the TV, remove the detachable back cover and disconnect all the cables. ● At least two people are required to move the TV. Support the TV as shown below to prevent injury that may be caused by the tipping or falling of TV. ● Do not hold the screen part when moving the TV. ● Transport only in upright position. Transporting the TV with its display panel facing upwards or downwards may cause damage to the internal circuitry.
■■Magnetic influence Caution ● This TV incorporates magnets in the areas enclosed by the dotted lines as shown below to support the detachable back cover. Keep magnet field sensitive objects, such as a cardiac pacemaker, magnetic / IC card, etc. away from the TV. Otherwise, malfunction or data loss may occur. Accessories Remote Control (p. 14) ● N2QAYA000109 Touch Pad Controller (p. 15) ● N2QBYA000018 OLED TV Pedestal (p.
Operating Instructions Production Registration Leaflet ● Accessories may not be placed all together. Take care not to throw them away unintentionally. ● For information about the optional accessories, refer to [eHELP] (Support > Optional accessories). 1 C A Assembling / Removing the pedestal Assembly screw (8) M5 × 9 D Assembly screw (8) M4 × 14 Pole (4) Base 2 B ■■Assembling the pedestal ● Support the TV as shown below to prevent injury that may be caused by the tipping or falling of TV.
Connections 10 SERVICE PORT This terminal is for special applications used by authorised service dealers. ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ● Check the terminal type and cable plugs are correct for connection. ● Use a fully wired HDMI compliant cable. ● Use a fully wired SCART cable. ● Keep the TV away from electronic equipment (video equipment, etc.
Satellite connection ● For Freesat, Other Sat., Satellite ■■Dual Tuner Terrestrial aerial ■■DVD Recorder (VCR) / Cable TV box TV TV Cable Satellite cables Satellite dish ■■Single Tuner TV RF cable AV1 (SCART) adaptor (supplied) SCART cable Satellite cable HDMI cable Satellite dish Terrestrial aerial ● To ensure your satellite dish is correctly installed, please consult your local dealer. Also consult the received satellite broadcasting companies for details.
■■Wireless connection ■■Camcorder / Game equipment (VIDEO equipment) Internet environment TV Built-in wireless LAN Access point Connections for 4K compatible equipment (Listening) TV (Viewing) HDMI cable 4K compatible equipment ● Connect the 4K compatible equipment to HDMI terminal and you can watch contents of 4K format. ● When connecting to HDMI terminal, use a 4K compatible cable.
■■Common Interface ● Turn the TV off with Mains Power On / Off switch whenever inserting or removing the CI module. ● If a smart card and a CI module come as a set, first insert the CI module, then insert the smart card into the CI module. ● Insert or remove the CI module completely in the correct direction as shown. ● Normally encrypted channels will appear. (Viewable channels and their features depend on the CI module.
■■Mounting the detachable back cover Insert each protrusion of the detachable back cover to the corresponding dents of the TV securely so that the detachable back cover is held in place by the magnets. Note the following to prevent the detachable back cover from falling down. Otherwise, accidental injury or damage may occur. ● Do not apply a load to the detachable back cover. ● Be careful not to nip the cables between the TV and the detachable back cover.
Identifying Controls Remote Control 6 OK ● Confirms selections and choices. ● Press after selecting channel positions to quickly change channel. 7 [Option Menu] ● Easy optional setting for viewing, sound, etc. 8 APPS ● Displays applications list. 9 Sound Mute On / Off 10 Text service button 11 Volume Up / Down 12 Numeric buttons ● Changes channel and teletext pages. ● Sets characters. ● When in Standby mode, switches TV on. 13 [eHELP] ● Displays [eHELP] (Built-in Operating Instructions).
■■Installing / Removing batteries Pull open Hook Close Note the correct polarity (+ or -) Touch Pad Controller Touch Pad Controller is designed for the convenient operations, especially, on internet content. You can operate the TV intuitively with this controller. ● Touch Pad Controller can be used exclusively for controlling this TV. ● Register the Touch Pad Controller to this TV with Bluetooth wireless technology before using.
■■Installing / Removing batteries Indicator / Control panel Slide open ● When pressing 4, 5, 6 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight which button has been pressed. 4 5 6 1 2 3 Close Note the correct polarity (+ or -) Note ● It is recommended to hold Touch Pad Controller with your hand when using. ● The battery power will be used whenever you use Touch Pad Controller (including the touch of the touch pad) even if not operating the TV.
First time Auto Setup When the TV is turned on for the first time, it will automatically search for available TV channels and give options to set up the TV. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 9 - 13) and settings (if necessary) of the connected equipment before starting Auto Setup. For information about the settings for the connected equipment, read the manual of the equipment.
Watching TV How to Use eHELP 1 [eHELP] is the detailed operating instructions built into the TV, and gives a more detailed explanation for a better understanding of the operation of each feature. Turn power on (TV) 1 or (Remote Control) ● Mains power On / Off switch should be on. (p. 16) 2 or [Help] Select the mode TV Selection Freesat DVB Analogue Other Sat. Satellite ● Selectable modes vary depending on the stored channels and selected country.
Viewing 3D images You can enjoy viewing 3D images of content or programmes supporting 3D effects by wearing the 3D Eyewear (supplied). ● The 3D Eyewear must be worn to view 3D images. ● This TV supports [Frame Sequential]*, [Side by Side] and [Top and Bottom] 3D formats. (3D content of 4K format is not supported.) ● For details, refer to [eHELP] (Watching > 3D).
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. ● For details, refer to [eHELP] (Support > FAQs). The TV does not switch on ● Check the mains lead is plugged into the TV and the mains socket. ● The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p. 4) The TV goes into Standby mode ● Auto power standby function is activated. The remote control does not work or is intermittent ● Are the batteries installed correctly? (p.
Maintenance First, remove the mains plug from the mains socket. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
Specifications HDMI2: 4 K, 3D (3D content of 4K format is not supported.), Content Type, Audio Return Channel, Deep Colour, x.v.Colour™ ● This TV supports “HDAVI Control 5” function. ■■TV Model No. TX-65CZ952B Dimensions (W × H × D) 1 448 mm × 913 mm × 311 mm (With Pedestal / Detachable back cover) 1 448 mm × 847 mm × 113 mm (With Detachable back cover) 1 448 mm × 847 mm × 106 mm (TV only) Mass Card slot Common Interface slot (complies with CI Plus) × 1 ETHERNET RJ45, IEEE802.
PAL 525/60 Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc playback from DVD player and recorder M.NTSC Playback from M.NTSC Video recorders (VCR) Mass Approx.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
