Operating Instructions

English
12
■ Common Interface
●
Turn the TV off with Mains Power On / Off switch
whenever inserting or removing the CI module.
●
If a smart card and a CI module come as a set, first
insert the CI module, then insert the smart card into
the CI module.
●
Insert or remove the CI module completely in the
correct direction as shown.
●
Normally encrypted channels will appear. (Viewable
channels and their features depend on the CI
module.)
If encrypted channels do not appear
[Common Interface] in the Setup Menu
●
There might be some CI modules in the market
with older firmware versions that do not work fully
interoperable with this new CI+ v1.3 TV. In this case,
please contact your content provider.
●
For details, refer to [eHELP] (Functions > Common
Interface), read the manual of the CI module, or
check with the content provider.
TV
CI module
■ USB HDD (for recording)
●
Use USB 3 for connecting the USB HDD.
●
For details, refer to [eHELP] (Recording).
■ VIERA Link
●
Use HDMI1 - 4 for VIERA Link connection.
●
For details, refer to [eHELP] (Functions > VIERA Link
“HDAVI Control™”).
Cable arrangement
Fix the cables using the hooks and cable clamps, and
then mount the detachable back cover to the TV.
●
The detachable back cover is for exclusive use to
cover cables exposed on the rear side.
●
Note that the detachable back cover cannot be fixed if
the cables are too thick to fit into the hooks.
■ Fixing the cables using the hooks and
cable clamps
2
1
1
2
Open
Close
Cable
Open
Close
Cable