Operating Instructions
■ Other Sat. / Satellite
●
To use dual tuner function, set Dual Tuner Mode to On.
1. Select Auto Setup and press OK to access.
2. Select the satellite.
●
Select IN 1 / IN 2 in Signal Input to set for each tuner.
●
Selectable satellites are Astra2/Eurobird, Astra1 and Hotbird.
●
Check the dish alignment for the satellite to select.
– The Freesat channel uses Astra2 at 28.2° East and Eurobird1
at 28.5° East satellites. To ensure your satellite dish is correctly
installed, consult your Freesat registered dealer. (UK only)
– For information about Astra1 and Hotbird, consult the received
satellite broadcasting companies.
●
If you want to tune from all available satellites, select Any Satellite.
3. Select Start and press OK to access.
4. The signal condition is displayed and press OK to access.
●
If you select Any Satellite, this step is skipped.
●
It takes a while to check the connection for your selected satellite.
●
Ensure that the Signal Lock status is shown as Locked. If it is not
locked, the search cannot be executed.
●
If the status is shown as Not locked and Signal Quality / Signal
Strength have no indications, please check the dish alignment. If the
status is shown as Not locked but there are some levels of Signal
Quality / Signal Strength indicated, select Any Satellite in step 2 and try
again.
5. A confirmation screen is displayed and press OK to access.
6. Select a search mode and press OK to start Auto Setup. (Settings are
made automatically.)
●
If you select Astra2/Eurobird or Any Satellite, Freesat channels will also
be searched.
●
When the operation is completed, the channel at the lowest position will
be displayed.
- 127 -