Model No. English TX-50EX750B TX-58EX750B TX-65EX750B TX-75EX750B Operating Instructions LED TV 50-inch model 58-inch model 65-inch model 75-inch model For more detailed instructions, please refer to [eHELP] (Built-in Operating Instructions). ● How to use [eHELP] (p. 25) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference.
● For information about the trademarks, refer to [eHELP] (Search by Purpose > Read first > Before use > Licence). The illustration for TX-58EX750B is used in this manual unless otherwise mentioned. Illustrations shown may be different depending on the model.
Important Notice Notice for DVB / Data broadcasting / IPTV functions This TV is designed to meet the standards (as of August, 2016) of digital services. ● Not all the features are available depending on the country, area, broadcaster, service provider and network environment. ● Compatibility with future services is not guaranteed.
● Insert the mains plug fully into the mains socket. ● To turn Off the apparatus completely, you must pull the mains plug out of the mains socket. Consequently, the mains plug should be easily accessible at all times. ● Disconnect the mains plug when cleaning the TV. ● Do not touch the mains plug with wet hands. ● Do not damage the mains lead. • Do not place a heavy object on the lead. • Do not place the lead near a high temperature object. • Do not pull on the lead.
■ Pedestal Warning ● Do not disassemble or modify the pedestal. Caution ● Do not use any pedestal other than the one provided with this TV. ● Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately. ● During setup, make sure that all screws are securely tightened. ● Ensure that the TV does not suffer any impact during installation of the pedestal. ● Ensure that children do not climb onto the pedestal.
■ When not in use for a long time Caution This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live mains socket. ● Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time. ■ Excessive volume Caution ● Do not expose your ears to excessive volume from the headphones. Irreversible damage can be caused. ● If you hear a drumming noise in your ears, turn down the volume or temporarily stop using the headphones.
Accessories Standard accessories Remote Control (p. 22) ● N2QAYB001115 Optional accessories 3D Eyewear ● If you need 3D Eyewear, please purchase Panasonic optional accessories. ● Use Panasonic 3D Eyewear supporting Bluetooth wireless technology for active shutter 3D. ● For information about 3D Eyewear: http://panasonic.jp/support/global/cs/tv/ Pedestal 50-inch model 58-inch model 65-inch model 58-inch model 65-inch model (p. 8) 75-inch model (p. 14) Cable clamp (p.
Assembling / Removing the pedestal 50-inch model 58-inch model Assembly screw (10) M4 × 12 Assembly screw (2) 65-inch model About the pedestal height 50-inch model High M5 × 15 Main bracket Pole 50-inch model 58-inch model 65-inch model Support bracket Base Cover 50-inch model 58-inch model 65-inch model Low 8 English 58-inch model ● Select a pedestal height from the following 4 types. ● The pedestal height can be changed according to step 2 in “Assembling the pedestal”. (p.
Preparations Take out the pedestal and the TV from the packing case and put the TV onto a work table with the screen panel down on the clean and soft cloth (blanket, etc.) ● Use a flat and firm table bigger than the TV. 2 ● Do not hold the screen panel part. ● Make sure not to scratch or break the TV.
3 A E 5 A E D F 6 4 A B 10 English
Assembling the pedestal 7 65-inch model 1 A C G ■ To change the height Be sure to perform the following procedures when you change the height after assembling the pedestal. 1 2 3 4 Remove the cover . Remove the assembly screws from the base. Lift the TV and pull out the pole from the base. Put the TV onto a work table with the screen panel down on the clean and soft cloth. 5 Remove the assembly screws from the support bracket. 6 Pull out the pole from the main bracket. 7 Remove the support bracket.
4 2 A D 5 3 A E A E F 12 English
7 6 G B Adjusting the panel to your desired angle 50-inch model 58-inch model 65-inch model ● Do not place any objects within the full rotation range.
Removing the pedestal Assembling / Removing the pedestal Be sure to remove the pedestal in the following procedures when you repack the TV. 1 2 3 4 5 6 7 8 Remove the cover . Remove the assembly screws from the base. Lift the TV and pull out the pole from the base. Put the TV onto a work table with the screen panel down on the clean and soft cloth. Remove the assembly screws from the support bracket. Pull out the pole from the main bracket. Remove the assembly screws from the main bracket.
Assembling the pedestal 3 1 C B 2 A Removing the pedestal Be sure to remove the pedestal in the following procedures when you use the wall-hanging bracket or repack the TV. 1 Remove the cover . 2 Remove the assembly screws from the pedestal. 3 Pull out the pedestal from the TV.
Connections Terminals 1 ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ● Check the terminal type and cable plugs are correct for connection. ● Use a fully wired HDMI compliant cable. 2 3 4 ● Keep the TV away from electronic equipment (video equipment, etc.
AV devices Basic connections ■ DVD Recorder / Blu-ray Recorder, etc. ■ Mains lead TV AC 220-240 V 50 / 60 Hz Mains lead ■ Aerial TV HDMI cable RF cable DVD Recorder / Blu-ray Recorder, etc. RF cable Terrestrial aerial ● For DVB, Analogue Terrestrial aerial ■ Cable TV box TV Satellite connection ● For Freesat, Other Sat.
■ [HDMI Auto Setting] (Setup Menu) Network A broadband network environment is required to be able to use internet services. ● If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the internet environment for wired connection or wireless connection. ● Setup of the network connection will start when first using the TV. (p.
■ Amplifier (listening with external speakers) TV ● Use HDMI2 to connect the TV to an amplifier which has ARC (Audio Return Channel) function. If connecting to an amplifier without ARC function, use DIGITAL AUDIO. ● To enjoy multi-channel sound from external equipment (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For information about the connections, read the manuals of the equipment and amplifier. TV CI module ■ USB HDD (for recording) ● Use USB 1 port for connecting the USB HDD.
75-inch model 65-inch model 75-inch model Attach the cable clamp Insert the cable clamp in a hole Hole Bundle the cable Set Attach the cable tie To release: Insert the cable tie in a hole Hole Keep pushing the tab Tab To remove from the TV: Snaps Bundle the cables Keep pushing both side snaps Set the tip in the hooks ■ Fixing the cables using the cable tie 50-inch model 58-inch model Hooks To loosen: Keep pushing the knob Knob To remove from the TV: Snaps Keep pushing both side snaps 20 Engl
50-inch model 58-inch model ■ Fixing the cables using the cable band ■ Attaching the cable cover / terminal cover ● Do not apply load to the cable cover / terminal cover. ● Be careful not to nip the cables between the TV and the cable cover / terminal cover. ● When using USB 2 port, USB 3 port or HDMI4 terminal, you cannot attach the cable cover. Keep the removed cable cover for future use. ● When using AV terminal, ETHERNET terminal or DIGITAL AUDIO, you cannot attach the terminal cover.
Identifying Controls 7 OK ● Confirms selections and choices. ● Press after selecting channel positions to quickly change channel. Remote Control 8 [Option Menu] ● Easy optional setting for viewing, sound, etc. 9 Coloured buttons (red-green-yellow-blue) ● Used for the selection, navigation and operation of various functions. 10 Volume Up / Down 11 Numeric buttons ● Changes channel and teletext pages. ● Sets characters. ● When in Standby mode, switches TV on.
■ Installing / Removing batteries Pull open Hook Indicator / Control panel ● When pressing 4, 5, 6 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight which button has been pressed. 4 5 Close 6 Note the correct polarity (+ or -) 7 1 2 3 Rear side of the TV 1 Remote control signal receiver ● Do not place any objects between the TV remote control signal receiver and remote control.
First time Auto Setup When the TV is turned on for the first time, it will automatically search for available TV channels and give options to set up the TV. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 16 - 21) and settings (if necessary) of the connected equipment before starting Auto Setup. For information about the settings for the connected equipment, read the manual of the equipment.
Watching TV How to Use eHELP 1 [eHELP] is the detailed operating instructions built into the TV, and gives a more detailed explanation for a better understanding of the operation of each feature. Turn power on (TV) 1 or (Remote Control) ● Mains power On / Off switch should be on. (p. 23) Displays information bar on the edge of screen for several seconds. ● For information about the operation and settings, refer to [eHELP].
● To scroll the description (if more than 1 page) While the description is highlighted ● To open the reference screen ( ) ● To display the menu related to the description (only for some descriptions) (red) ● To check the features of this TV Search by Purpose > Read first > Features Viewing 3D images You can enjoy viewing 3D images of content or programmes supporting 3D effects by wearing the 3D Eyewear (optional). ● The 3D Eyewear must be worn to view 3D images.
Note ● Turn off the 3D Eyewear after using it. ● Use the 3D Eyewear within approximately 3.2 m from the TV. You cannot view the 3D images with the 3D Eyewear too far from the TV, because of the difficulty of receiving radio waves from the TV. ● The range may be shortened depending on the obstacles between the TV and the 3D Eyewear, or the surrounding environment. ● When viewing 3D images, make sure your eyes are in a horizontal position where double vision does not occur.
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. ● For details, refer to [eHELP] (Support > FAQs). The TV does not switch on ● Check the mains lead is plugged into the TV and the mains socket. ● The fuse in the mains plug may have blown. Replace it with one of an identical rating. (p. 3) The TV goes into Standby mode ● Auto power standby function is activated. The remote control does not work or is intermittent ● Are the batteries installed correctly? (p.
Maintenance Specifications First, remove the mains plug from the mains socket. ■ TV Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or fingerprints. For stubborn dirt: (1) First clean the dust from the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring out the cloth firmly.
75-inch model 62.5 kg Net (With Pedestal) 54.0 kg Net (TV only) DIGITAL AUDIO output PCM / Dolby Digital, Fibre optic Receiving systems / Band name Power source AC 220-240 V, 50 / 60 Hz DVB-S / S2 (Freesat / Other Sat.) Panel Freesat services via Satellite dish input LED LCD panel Receiver frequency range - 950 MHz to 2 150 MHz Not available for DiSEqC control Sound Speaker output 20 W (10 W + 10 W) Headphones M3 (3.
Built-in wireless LAN Standard compliance and Frequency range*1 IEEE802.11a/n 5.180 GHz - 5.320 GHz, 5.500 GHz - 5.580 GHz, 5.660 GHz - 5.700 GHz IEEE802.11b/g/n 2.412 GHz - 2.472 GHz Security WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) ■ When using the wall-hanging bracket Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. 50-inch model 58-inch model 1 Remove the assembly screws bracket . 2 Remove the back bracket .
● Holes for wall-hanging bracket installation Rear of the TV 50-inch model 58-inch model 65-inch model a a: 400 mm b b: 200 mm 75-inch model a: 600 mm b: 300 mm (View from the side) Depth of screw 50-inch model minimum: 10 mm maximum: 15 mm Diameter: M6 58-inch model minimum: 10 mm maximum: 17 mm Diameter: M6 65-inch model minimum: 9 mm maximum: 30 mm Diameter: M6 75-inch model minimum: 11 mm maximum: 30 mm Diameter: M8 Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
