Quick Start Guide
English
21
Voice controls
The TV recognizes speech when you talk into the voice
control microphone, enabling you to perform operations
such as changing TV channels, adjusting the volume,
searching for programmes, and doing internet searches.
If the remote control is not registered (paired) with the
TV, register (pair) the remote control.
(p. 17)
The Google Assistant function may be in preparation
and the function will be available after the preparation
is complete. The Google Assistant function may
not be available depending on the country, area or
broadcaster.
The TV needs to be connected to the internet in order
to perform searches, etc. (p. 15)
The effective range for voice controls depends on the
viewing environment.
Operation may not be correct depending on the type
of voice the person has and the way they speak, as
well as the surrounding environment and conditions.
When other Bluetooth
®
devices are connected at
the same time, voice controls may not work properly
depending on the connected devices.
Selecting the voice service (when it is not selected)
1 Press the voice control button
2 Selects the voice service for voice control function.
Only one voice service can be used with the TV.
The voice service selection screen can also be
displayed via [Voice Control] on the menu bar.
Controlling with your voice
1 Press the voice control button
2 Speak into the voice control microphone
Voice control
microphone
For information about settings and operations for
voice controls, refer to [eHELP] (Search by Purpose >
Functions > Voice Control).
Functions of voice control and voice services are
subject to change without notice.
Indicator / Control panel
When pressing 4, 5, 6 buttons, the control panel
guide appears on the right side of the screen for
3 seconds to highlight which button has been
pressed.
1 2, 3
5
6
7
4
Rear side of the TV
1 Power LED
Red:
Standby
Green:
On
Depending on the ambient brightness,
adjusts the brightness of LED to easy-to-view
levels automatically.
Orange:
Standby with some functions (recording, etc.)
active
The LED blinks when an infrared signal is received
from the remote control.
2 Ambient sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture menu is set to
[On].
3 Remote control signal receiver (for infrared
communication)
Do not place any objects between the TV remote
control signal receiver and remote control.
4 Input mode selection
Press repeatedly until you reach the desired mode.
Menu
Press and hold for about 3 seconds to display the
menu bar.
OK (when in the menu system)
5 Channel Up / Down
Cursor Up / Down (when in the menu system)
6 Volume Up / Down
Cursor Left / Right (when in the menu system)
7 Mains power On / Off switch
Use to switch the mains power.
To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.
[
]: Standby / On