Operating Instructions

English
22
Indicator / Control panel

When pressing 3, 4, 5 buttons, the control panel
guide appears on the right side of the screen for
3 seconds to highlight which button has been
pressed.
12
4
5
6
3
Rear side of the TV
1 Remote control signal receiver (for infrared
communication)

Do not place any objects between the TV remote
control signal receiver and remote control.
Ambient sensor

Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture menu is set to
[On].
2 Power LED
Red:
Standby
Green:
On

Depending on the ambient brightness,
adjusts the brightness of LED to easy-to-view
levels automatically.
Orange:
Standby with some functions (recording, etc.)
active

The LED blinks when an infrared signal is received
from the remote control.
3 Input mode selection

Press repeatedly until you reach the desired mode.
Menu

Press and hold for about 3 seconds to display the
menu bar.
OK (when in the menu system)
4 Channel Up / Down

Cursor Up / Down (when in the menu system)
5 Volume Up / Down

Cursor Left / Right (when in the menu system)
6 Mains power On / Off switch

Use to switch the mains power.

To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.

[
]: Standby / On
First time Auto Setup
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.

These steps are not necessary if the setup has been
completed by your local dealer.

Please complete connections (p. 14 - 17) and
settings (if necessary) of the connected equipment
before starting Auto Setup. For information about
the settings for the connected equipment, read the
manual of the equipment.
1 Plug the TV into a live mains socket
and turn the power on

Takes a few seconds to be displayed.
2 Select the following items
Set up each item by following the on-screen instructions.
Example:
Please select your viewing environment.
Home Shop
 How to use the remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select the language
Select your country
Select [Home]
Select [Home] for use in a home viewing environment.

[Shop] is for shop display.

To change the viewing environment later on, the set
will need to have all settings initialised by accessing
[Shipping Condition].