Quick Start Guide

English
12

To remove from the TV:
C
Adjusting the panel to your desired
angle

Do not place any objects within the full rotation range.
15°
15°
(View from the top)
Removing the pedestal
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1
Remove the cable cover
.
2
Remove the assembly screws
from the pedestal.
3 Pull out the pedestal from the TV.
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.

Holes for wall-hanging bracket installation
Rear of the TV
300 mm
300 mm
(View from the side)
Depth of screw
minimum: 12 mm
maximum: 39 mm
Diameter of screw
M6
Screw for fixing the TV onto the
wall-hanging bracket (not supplied with
the TV)
Warning

Using other wall-hanging brackets, or installing
a wall-hanging bracket by yourself have the risk
of personal injury and product damage. In order
to maintain the unit’s performance and safety, be
absolutely sure to ask your dealer or a licensed
contractor to secure the wall-hanging brackets. Any
damage caused by installing without a qualified
installer will void your warranty.

Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.

Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.

Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.

To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.