Operating Instructions

■ Edit Analogue Channels
●
To swap / move the channel position (if available)
1) Press
(green) to edit.
2) Set the new position with Cursor buttons and press
(green) to
store.
●
To retune each channel (Manual Tuning)
(red)
●
To rename the channel name
1) Press
(blue) to edit.
2) Enter characters (maximum 5 characters) with Cursor buttons or
Numeric buttons, and press OK to set.
3) Press BACK to store.
= Note =
●
If a VCR is connected only with the RF cable in Analogue, edit VCR.
- 124 -