Quick Start Guide

ManualsBrandsPanasonic ManualsAV ProductsTX75LXT886

English

Set up your Wi-Fi network and Google account

≥ If you are using an Android phone for setup, select

[Continue]. You can then easily transfer your Android

phone’s Wi-Fi network and Google account to your

TV.

≥ If you are not using an Android phone for setup, select

[Skip], then complete settings on the setup screen

which appears next.

Select your country

Enter the PIN number for parental controls

Select your tuner mode

≥ When [Satellite] has been selected, follow the on-

screen instructions to set the satellite type and other

details.

Run a channel scan

Select [Home]

Select [Home] for use in a home viewing environment.

≥ [Shop] is for shop display.

≥ To change the viewing environment later on, the set

will need to have all settings initialised by accessing

[Reset].

If tuning has failed check the Satellite cable, RF cable,

and the network connection, and then follow the on-

screen instructions.

≥ The TV goes into Standby mode when no operation is

performed for 4 hours if [Switch Off Timer] in the

Power menu is set to [240 Minutes] (factory setting).

≥ The TV goes into Standby mode when no signal is

received and no operation is performed for 10 minutes

if [No Signal Power Off] in the Power menu is set to

[10 Minutes] (factory setting).

≥ To retune all channels

[Channel Scan] (Settings > Channel > Channels)

≥ To switch the TV signal mode later

[Channel Installation Mode] (Settings > Channel)

≥ To initialise all settings

[Reset] (Settings > Device Preferences > About)

Watching TV

1 Turn power on

2 Select TV

3 Select a channel

≥ To select a channel position with 2 or more-digit, e.g.

399

Initial Setup is now complete and the

TV is ready for viewing.

Note

(Bottom of the TV)

(Remote Control)

≥ Mains power On / Off switch should be on.

(p. 18)

down

TX-75LXx88x_72-75LXW8-T32Z3_eng.book 19 ページ２０２２年６月２０日　月曜日　午後６時４８分