Operating instructions
EXIT
MENU
INPUT
TV
jkl
ghi
mno
tuvpqrs
wxyz
abc def
38
Timer Programming
Timer Programming from Menu
The Timer Programming menu allows you to choose programmes that you wish to record or remind
watching. At the correct time, the TV will switch on and tune to the correct channel even if the TV is in
Standby mode.
TV Guide may also be used to set timer programming
(p. 19).
This function is not available in Analogue mode.
Timer Programming does not work properly if the TV does not acquire the correct time data from the TV signal.
The TV must be either On or in standby for Ext Rec. of Timer Programming.
No other channel can be selected while Ext Rec. of Timer Programming is in progress.
It may not be possible to record an encrypted programme (which is copy-protected).
When recording programmes, be sure to make the proper settings on the recorder connected to the TV.
If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 52 and p. 53)
and the “Link Settings” (p. 28) are completed, no setting of the recorder is required. Also read the manual of the
recorder.
If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, set “Q-Link” in the Setup Menu
(p. 28) to the connected terminal (AV1 or AV2), and make timer programming of the recorder. For preparations of
a recorder, read the manual of the recorder.
Recording is possible in composite video via SCART only, including HD content.
2 mins. before the starting time, a reminder message appears if you are watching TV.
To remove the message and start the programming •
To cancel the programming •
EXIT
1
Select the mode you want to set
p. 14
TV
2
Display the menu
MENU
3
Select “Setup”
Main Menu
Picture
Sound
Setup
access
select
4
Select “Timer Programming”
Setup Menu
1/2
Off Timer Off
Access
Link Settings
Child Lock
DVB-C Tuning Menu
Language
Display Settings
Common Interface
System Menu
Timer Programming
access
select
5
Set
To return to TV
EXIT
To unlock the tuner
(stop recording)
EXIT