Operating instructions

Displaying PC Screen on TV 
Advanced
45
PC menu setting  (changed as desired)
To make settings  “How to Use Menu Functions” to (p. 24)
Menu Item Adjustments / Configurations (options)
Picture
Advanced
PC
Settings
R-Gain Adjusts the white balance for red areas
G-Gain Adjusts the white balance for green areas
B-Gain Adjusts the white balance for blue areas
Gamma Switches the gamma curve (2.0 / 2.2 / 2.5)
Reset to
Defaults
Press the OK button to reset to the default Advanced PC Settings
Setup
PC
Setup
Input
Resolution
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),

XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
Options change depending on signals

Clock Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
Adjust after Clock adjustment
 Set to the minimum level if noise occurs 
Sync
Chooses another synchronous signal if the image is distorted (H & V / On Green)
H & V : by the horizontal and vertical signals from your PC 
On Green : by the green signal from your PC (if available)
Reset to
Defaults
Press the OK button to reset to the default PC Setup settings
Other items  p. 26 - 29
Note
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using HDMI cable 
(p. 59).