Operating instructions

Timer Programming
41
Timer Programming
Timer Programming from Menu
The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external
recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode.
TV Guide may also be used to set timer programming event (p.20).
t
This function is not available in Analogue mode.
t
Timer Programming can store up to 15 events.
t
Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service
provider.
t
For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, the TV must
be On.
t
No other channel can be selected while the recording of Timer Programming is in progress.
t
It may not be possible to record an encrypted programme (which is copy-protected).
t
When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the
TV.
If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p.59,60) and the [Link
Settings] (p.30) are completed, no setting of the recorder is required. Also read the manual of the recorder.
t
If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, make timer programming of the recorder.
For preparations of a recorder, read the manual of the recorder.
t
Recordings are always in standard definition composite video via SCART, even if the original programme is in high definition.
t
2 minutes before the starting time, a reminder message appears if you are watching TV.
t
To remove the message and start the programming
t
To cancel the programming
EXIT
RETURN
DIRECT TV REC N ASPECT
AV
SD CARD
OPTION
INDEX HOLD STTLTEXT
LAST VIEW
jkl ghi mno
tuvpqrs wxyz
abc def
EXIT
MENU
INPUT
TV

To return to TV
EXIT

To unlock the tuner
and stop recording
EXIT
1
Select the mode you want to set
(DVB-C or DVB-T)
(p.14)
TV
2
Display the menu
MENU
3
Select [Setup]
Main Menu
Picture
Sound
Setup
access
select
4
Select [Timer Programming]
Setup Menu
1/2
Timer Programming
Off Timer
Link Settings
Child Lock
DVB-C Tuning Menu
Language
Display Settings
Common Interface
System Menu
Off
Access
access
select