Operating Instructions

- 47 -
●
Normally set Frequency, Symbol Rate and Network ID to Auto. If Auto
is not displayed or if necessary, enter each value specified by your
cable provider with numeric buttons.
●
After settings, select Start scan with / and press OK to search.
3. The confirmation screen is displayed and press OK to start Auto Setup
(Settings are made automatically)
●
When the operation is completed, the channel at the lowest position will
be displayed.
■ Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu
2. Set Auto Setup with following control panel buttons
●
Move the cursor / select from a range of options / select the menu item
(up and down only)
●
Access the menu / store settings after adjustments have been made or
options have been set with INPUT/OK/HOLD for MENU button.
Manual Tuning
●
Normally use Auto Setup or Update Channel List to retune DVB channels.
●
If tuning has not been done completely or for adjusting the direction of the
aerial or dish, use this function. (DVB)
●
All DVB channels found will be added to Channel List.
■ DVB-S
1. Select Satellite with / and set with /
●
Please consult the received satellite broadcasting companies for the
setting.
2. Select Transponder Frequency / Symbol Rate / Polarisation / Modulation /
Service ID with
/ and set with / or numeric buttons
3. Select Start scan with / and press OK to search