Operating Instructions
- 49 -
channels or change channel names and positions automatically.
●
The channel list is updated while keeping your settings in Favourites Edit,
Channel List, Child Lock, etc.
●
Depending on the signal condition, the update may not work properly.
●
To update DVB-S channels, set Satellite, Search Mode and Scan Mode
before updating.
1) Select Satellite / Search Mode / Scan Mode with
/ and press OK
to access
2) Set each item with
/ and press OK to store
3) After settings, select Start scan with
/ and press OK to search
New Channel Message
Selects whether to give a notification message when a new DVB channel is
found or not.
●
When a notification message appears, you can perform Update Channel
List pressing OK.
Signal Condition
Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for DVB
reception.
●
Use the Signal Quality indicator as follows.
– Green bar: Good
– Yellow bar: Poor
– Red bar: Bad (Check the terrestrial aerial, cable or satellite dish)
●
Vertical lines show the maximum signal value of the selected channel.
●
To change the channel
●
For DVB mode
Selectable satellites
■ Selectable satellites and dish alignment to tune DVB-S
channels
To ensure your satellite dish is correctly installed, please consult your local
dealer.
Also please consult the received satellite broadcasting companies for details.