Operating instructions

Technical Information
95
■ Gamepad
●
Check the gamepads that have been tested for the performance with this TV at the following website.
http://panasonic.jp/support/global/cs/tv/
●
Some of the keys of gamepads correspond to the operation of the remote control.
Select Start
1011
1
7 69 8
2
3
4
5
Example:
Remote Control Remote Control
1 Volume Up / Down 7 VIERA TOOLS
2 Channel Up / Down 8 EXIT
3 GUIDE
9 INPUT (AV)
4 OK
5 BACK/RETURN 10 MENU
6 INTERNET 11 Cursor buttons
Input signal that can be displayed
■ COMPONENT (Y, PB, PR) (from AV2 terminal), HDMI
Signal name COMPONENT HDMI
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
1,125 (1,080) / 60p, 50p, 24p
: Applicable input signal
■ PC (from D-sub 15P)
Signal name Horizontal frequency (kHz) Vertical frequency (Hz)
640 × 480 @60 Hz 31.47 59.94
800 × 600 @60 Hz 37.88 60.32
852 × 480 @60 Hz 31.44 59.89
1,024 × 768 @60 Hz 48.36 60.00
1,280 × 768 @60 Hz 47.70 60.00
1,280 × 1,024 @60 Hz 63.98 60.02
1,366 × 768 @60 Hz 48.39 60.04
Applicable input signal for PC is basically compatible to VESA standard timing.
■ PC (from HDMI terminal)
Signal name Horizontal frequency (kHz) Vertical frequency (Hz)
640 × 480 @60 Hz 31.47 60.00
1,280 × 720 @60 Hz 45.00 60.00
1,920 × 1,080 @60 Hz 67.50 60.00
Applicable input signal for PC is basically compatible to HDMI standard timing.
Note
●
Signals other than above may not be displayed properly.
●
The above signals are reformatted for optimal viewing on your display.
●
PC signal is magnified or compressed for display, so that it may not show fine detail with sufficient clarity.