Operating Instructions

Watching External Inputs
28
Watching External Inputs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input.

To connect the equipment
(p. 11 - 13, 87, 88)
The remote control is capable of operating the contents or external equipment. (p. 29)
1
Turn the TV on
When connecting with SCART (p. 12)
Receives input signals automatically when playback starts

Input signals are automatically identified by the SCART (pin 8) terminal.

This function is also available for HDMI connections (p. 87).
If input mode is not switched automatically
Perform and

Check the setup of the equipment.
2
Display the input selection menu
3
Select the input mode connected to the equipment
Input Selection
AV2
AV1
PC
SD Card/USB
TV
HDMI4
HDMI3
HDMI2
HDMI1
select
watch

You can also select the input using the AV button on the remote control or the TV
(except [SD Card/USB]).
Press the button repeatedly until the desired input is selected.

To switch between [COMPONENT] and [VIDEO] in [AV2], move the indicator by
pressing left and right cursor button.

[SD Card/USB]: Switches to Media Player.
“Using Media Player” (p. 60)

You can label or skip each input mode (except [SD Card/USB]). “Input Labels”
(p. 42)
Skipped inputs will not be displayed when the AV button is pressed.
4
View
AV1
Displays the selected mode
Note

If the external equipment has an aspect adjustment function, set it to “16:9”.

For details, read the manual of the equipment or ask your local dealer.

To return to TV