Operating Instructions

Quick Start Guide
7
Accessories / Options 
Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result. 
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result. 
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic 
dealer immediately.
During assembly, use only screws supplied and make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be 
strong enough to support the TV. It might fall over and become damaged and personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal 
injury may result.
Two or more people are required to install and remove TV.
If two or more people are not present, the TV may be dropped, and personal injury may result. 
Assembly screw (4)
XSS4+16FNK
Assembly screw (4)
XYN4+F12FJK
Bracket (1)
TUX0EA004 
(
TX-L32G20E
TX-L32G20ES
)
TUX0E198 
(
TX-L37G20E
TX-L37G20ES
)
TUX0EA007 
(
TX-L42G20E
TX-L42G20ES
)
Base (1)
TBL0E0110
(TX-L32G20E)
TBL0E0119
(TX-L32G20ES)
TBL0E0111
(TX-L37G20E)
TBL0E0120

(TX-L37G20ES)
TBL0E0112

(TX-L42G20E)
TBL0E0121
(TX-L42G20ES)
Assembling the pedestal
Use the four assembly screws to fasten the bracket
to the base securely.
Make sure that the screws are securely tightened.
Securing the TV
Use only the supplied assembly screws to fasten
securely.
Make sure that the screws are securely tightened.
Carry out the work on a horizontal and level surface.
A
C
D
Front
B
B
Foam mat or thick soft cloth
Adjust the panel to your desired angle
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
15°
a
b
15°
(View from the top)
TX-L32G20E, TX-L32G20ES

a: 358 mm / b: 230 mm
TX-L37G20E, TX-L37G20ES
a: 399 mm / b: 296 mm
TX-L42G20E, TX-L42G20ES

a: 450 mm / b: 322 mm
Set the mark at the centre as illustrated, to
ensure full degree rotation in either direction.