Operating Instructions
Using TV Guide
Basic
19
Other useful functions
Timer Programming (DVB mode)
Timer Programming can remind you to watch a programme or record one on an external recorder.
Select the
forthcoming
programme
select
set
Select the function
(Reminder or Ext Rec.)
LED
LED will turn to orange if
Timer Programming is set.
(Orange LED will flash if Ext Rec. of
Timer Programming is in progress.)
Guide
Guide
Timer Programming Wed 28 Oct 2009 10:46
Select timer
1/1
1D BBC ONE
DIY SOS
Wed 28 Oct 20:00 20:30
Date Start End
--- --/-- --:-- --:--
--/-- --:-- --:--
--- --/-- --:-- --:--
--- --/-- --:-- --:--
--/-- --:-- --:--
(30 min.)
(--- min.)
(--- min.)
(--- min.)
(--- min.)
---
Ext Rec.
---
---
---
---
Channel NameFunction No.
(Timer Programming screen)
Ext Rec. : to record the programme to the recorder
When the start time comes, the channel will be switched automatically and
the video and audio signals will be output. 2 mins. before the starting time,
a reminder message appears if you are watching TV.
Reminder
: to remind you to watch the programme
When you are watching TV, a reminder message appears 2 mins. before
the start time. Press the OK button to switch to the programmed channel.
select
store
To check / change / cancel a timer programming event “Timer Programming” (p. 43)
To return to TV Guide
RETURN
If you select a current programme
A confirmation screen asking whether you wish to watch or record the programme will appear.
Select “Timer Programming” and set “Ext Rec.” to record from the time
you finish programming the timer event setting.
View
Eastender
19:30- 20:00
Timer Programming
select
access
If a programme exists in both HD and SD broadcasts
The “Timer Options” screen will be displayed to select HD or SD broadcast.
101 BBC ONE 19:30-20:00 Wed 28 Oct 2009
119 BBC HD 19:30-20:00 Wed 28 Oct 2009
Timer Options
DIY SOS
select
set
Guide
Guide
Timer Programming Wed 28 Oct 2009 10:46
1D BBC ONE
DIY SOS
Wed 28 Oct 20:00 20:30
Date Start End
--- --/-- --:-- --:--
--/-- --:-- --:--
--- --/-- --:-- --:--
--- --/-- --:-- --:--
--/-- --:-- --:--
(30 min.)
(--- min.)
(--- min.)
(--- min.)
(--- min.)
---
Ext Rec.
---
---
---
---
Channel NameFunction No.
D
D
D
D
D
D
D
D
D
D
D
D
D
D
(Timer Programming screen)
“
” will be displayed if HD broadcast is set.
Note
This function is not available in Analogue mode.
Timer Programming can store up to 15 events.
Timer Programming reminder messages will remain displayed until one of the following occurs:
You press the OK button to view the programme or the EXIT button to cancel the reminder.•
The timer programming event that the reminder is set for ends.•
No other channel can be selected while Ext Rec. of Timer Programming is in progress.
When recording programmes, be sure to make the proper settings on the recorder connected to the TV.
If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 58) and the “Link
Settings” (p. 30) are completed, no setting of the recorder is required. Also read the manual of the recorder.