Operating instructions

DIRECT TV REC ASPECT
OPTION
TEXT
PROGRAMME
STTL INDEX HOLD
N
AV
EXIT
RETURN
INPUT
TV
jkl ghi mno
tuvpqrs wxyz
abc def
MENU
34
1
Select DVB-C or DVB-T
p. 14
TV
2
Display the menu
MENU
3
Select “Setup”
Main Menu
Picture
Sound
Setup
access
select
4
Select “DVB-C Tuning Menu” or “DVB-T Tuning Menu”
Setup Menu
1/2
Off Timer Off
Access
Access
Link Settings
Child Lock
DVB-T Tuning Menu
DVB-C Tuning Menu
Language
Display Settings
Common Interface
System Menu
Timer Programming
access
select
“DVB-C Tuning Menu” is available in 
DVB-C mode only.
“DVB-T Tuning Menu” is available in 
DVB-T mode only.
5
Select one of the following functions and set
DVB-C Tuning Menu
Favourites Edit Access
Channel List
Auto Setup
Manual Tuning
Update Channel List
New Channel Message
Signal Condition
Access
Access
Access
Access
On
Access
Attenuator Off
Auto Setup  “Retuning from Setup Menu” (p. 32 and p. 33)
access
select
The function items vary depending on 
the country you select (p. 12).
You can retune channels or make your favourite channel lists, skip unwanted channels, etc.
To return to TV

EXIT
Tuning and Editing Channels
(DVB)
Update DVB channel automatically
Update Channel List
You can add new channels, delete removed channels, update channel name and position automatically to
Channel List.
DVB-T Update Channel List
CH Channel Name Type Quality
Searching
This will take about 3 minutes.
Free TV: 0
Progress CH 5 69
Pay TV: 0 Radio: 0
Channel List is updated with keeping your settings in Favourites Edit, 
Channel List, Child Lock, etc.
Display a notification message
New Channel Message
Selects whether to give a notification message when a new DVB channel is found. (Off / On)
New channels found!
Press OK to update channel list
Press EXIT to ignore.
Selecting OK will perform “Update Channel List”.
Check DVB signal
Signal Condition
Selects a channel and checks the DVB signal condition.
To change the channel

DVB-T Signal Condition
Channel Name 70 CBBC Channel
Signal Quality
Signal Strength
Network Name
0 10
010
Wenvoe
Bit Error Rate 0.00E+00
Parameter [CH62] 802 MHz
A good Signal Strength is not an indication of suitable signal for DVB reception.
Please use the Signal Quality indicator as follows:
Signal Quality:
Green bar
 Good
Yellow bar
 Poor
Red bar
 Bad (Check the Terrestrial aerial or cable)
Reduce the DVB-C signal
Attenuator
If the DVB-C signal is too strong, the interference may occur. In this case set to “On” to reduce the signal
automatically.
This function is available only for DVB-C signal.