Operating Instructions

Accessories / Options
Quick Start Guide
9
■ Moving the TV
Hold the specified parts as shown to stand the TV up and move it with two people.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Put the TV onto a work table with the screen panel down on the clean and soft cloth.
2 Remove the assembly screws
from the cover.
3 Remove the assembly screws from the TV.
4 Remove the pedestal from the TV.
5 Remove the assembly screws from the bracket.
Adjusting the panel to your desired angle
●
Do not place any objects within the full rotation range.
15°
15°
(View from the top)
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
Screw (not supplied)
Diametre: 3 mm
Length: 15 - 20 mm
Screw hole