Operating Instructions

Using Common Interface
57
Using Common Interface
The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules.
This TV works only for Pay TV modules complying with CI standard.
●
Video and audio signals may not be output depending on broadcasts or services.
Caution
●
Turn off Mains power On / Off switch whenever inserting
or removing the CI module.
●
If a view card and a card reader come as a set, first
insert the card reader, then insert the view card into the
card reader.
●
Insert the module in the correct direction.
●
Remove the CI module from the TV when placing the
TV facing upward. This may cause damages to the CI
module and CI slot.
Insert or remove completely
CI slot
CI module
Rear of the TV
Insert the CI module (optional)
●
The features that appear on screen are dependent on the contents of the selected CI module.
●
Follow the instructions that came with the viewing card to tune in the encrypted channels. If encrypted channels do
not appear, perform the below to verify the card is recognised by the TV.
●
For more details, read the manual of the CI module, or check with the broadcaster.
1
Select DVB
(p. 20)
2
Display the menu and select [Setup]
Setup
select
access
3
Select [System Menu]
System Menu Access
select
access
4
Select [Common Interface]
Common Interface
Access
select
access
5
Access Common Interface and follow the on-screen instructions
Slot 1:
Common Interface
Module inserted
●
On-screen instructions may not correspond to the remote control buttons.