Operating Instructions

Using Network Services (DLNA / VIERA Connect)
72
■ [Acquire IP Address] / [Acquire DNS Address]
Sets [IP Address], [Subnet Mask], [Default Gateway] and [DNS Address].
Select [Acquire IP Address] / [Acquire DNS Address] and set to [Auto] (recommended).
Acquire IP Address Auto
IP Address
Subnet Mask
Default Gateway
Acquire DNS Address
DNS Address
Proxy Settings
IP/DNS Settings
Auto
●
The available settings are displayed automatically.
Manual settings
([IP Address], [Subnet Mask], [Default Gateway], [DNS Address])
select
access / store
3 Select [Proxy Settings] and set the items
Acquire IP Address
IP Address
Subnet Mask
Default Gateway
Acquire DNS Address
DNS Address
Proxy Settings
IP/DNS Settings
Auto
Auto
Access
select
access
●
After settings, return to the previous menu.
■ [Proxy]
Sets Proxy address.
●
This is the address of the relay server that is connected to the target server instead of the browser and sends data to
the browser. Setting is required if specified by the provider.
1. Select [Proxy] 2. Enter the address
Proxy
Host
select
set
●
You can set characters by using numeric
buttons.
3. Store
0
Proxy
Proxy Port
Proxy Settings
select
access
■ [Proxy Port]
Sets Proxy port number.
●
This number is also specified by the provider with the Proxy address.
1. Select [Proxy Port]
0
Proxy
Proxy Port
Proxy Settings
2. Move the cursor and enter the number
4 Select [Connection Test] and access to test
Connection Test Access
select
access
●
Performs automatic testing of the network connection for the TV. (It takes a
while to test.)
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.
Connection Test
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections. And then try again.
Wireless connection settings
This setting is for the wireless network connection.
●
Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the
manual of the access point.
1 Select [Network Connection] and set to [Wireless]
Network Connection Wireless
select
access / store