Operating Instructions

Technical Information
93
Devices for recording or playing back
SD Card
Card format:
SDXC Card - exFAT
SDHC Card / SD Card - FAT16 or FAT32
Compliant card type (maximum capacity):
SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB), miniSD Card (2 GB) (requiring
miniSD adaptor)
24 mm
32 mm
2.1 mm
If miniSD Card is used, insert / remove it together with the adaptor.
Check the latest information on the card type at the following website.
http://panasonic.jp/support/global/cs/tv/
Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.
USB Flash Memory (for playing back in Media Player)
USB Flash Memory format: FAT16, FAT32 or exFAT
A USB HDD formatted by PC is not guaranteed in Media Player.
Note
Data modified with a PC may not be displayed.
Do not remove the device while the TV is accessing data. Otherwise this can damage device or TV.
Do not touch the pins on the device.
Do not subject the device to a high pressure or impact.
Insert the device in the correct direction. Otherwise this can damage device or TV.
Electrical interference, static electricity, or erroneous operation may damage the data or device.
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV.
Panasonic is not liable for any deterioration or damage of recorded data.
PC connection
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
PC signals that can be input: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency 59 to 86 Hz
(more than 1,024 signal lines could result in incorrect display of the image).
A PC adaptor is not necessary for the DOS/V-compliant D-sub 15-pin connector.
Note
Some PC models cannot be connected to this TV.
When using PC, set the colour display quality of PC to
the highest position.
For details of the applicable PC signals
“Input signal that can be displayed” (p. 95)
Max. display resolution
4:3 1,440 × 1,080 pixels
16:9 1,920 × 1,080 pixels
D-sub 15-pin connector signal
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name
R
GND (Ground)
NC (not connected)
G
GND (Ground)
NC (not connected)
B
GND (Ground)
HD
NC (not connected)
NC (not connected)
VD
GND (Ground)
GND (Ground)
NC (not connected)