Operating Instructions

- 29 -
each input.
Ambient Sensor
1. Display the menu with MENU
2. Select Picture
Ambient Sensor with / and press OK to access
3. Select On / Off with
/ and press OK to set
Ambient Sensor
(On / Off)
●
Automatic Brightness Control function
Adjusts picture settings automatically depending on ambient lighting
conditions.
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
●
Off Timer is active.
Watching Basic Off Timer
●
No operation is performed for 4 hours while Auto Standby is set to On.
Settings Timer Auto Standby
●
No signal is received and no operation is performed for 10 minutes while
No signal Power off is set to On.
Settings Timer No signal Power off
= Note =
●
This function does not affect the recording of Timer Programming and One
Touch Recording.
Aspect
Change the aspect ratio (image size) with ASPECT.
●
Enjoy viewing the image at its optimum size and aspect. Programmes
usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and
the TV will choose the aspect ratio automatically according to the “Aspect
Control Signal”.
Watching For best picture Auto aspect
■ To change the aspect ratio manually
1. Display Aspect Selection list with ASPECT
2. Select the mode with
/ and press OK to set
●
You can also change the mode pressing ASPECT.