Operating instructions

- 161 -
Easy playback
Automatic input switching - When the connected equipment is operating, the
input mode is switched automatically.
Power on Link
Set Power on Link to On in the Setup Menu to use this function.
Settings Setup VIERA Link Settings
When the connected equipment starts playback or direct navigator / function
menu for the equipment is activated, the TV is automatically turned on. (Only
when the TV is in Standby mode.)
Power off Link
Set Power off Link to On in the Setup Menu to use this function.
Settings Setup VIERA Link Settings
When the TV is set to Standby mode, the connected equipment is also
automatically set to Standby.
●
This function will work even if the TV enters Standby mode automatically
by auto power standby function.
Standby Power Save
Set Standby Power Save to On in the Setup Menu to use this function.
Settings Setup VIERA Link Settings
The power consumption of the connected equipment in Standby mode is
controlled higher or lower in synchronisation with the TV on / off state to
reduce the consumption.
When the TV is set to Standby mode, the connected equipment is
automatically set to Standby and the power consumption of the connected
equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode,
but the power consumption is increased to start the connected equipment
fast.
●
This function is effective if the connected equipment can change the power
consumption in Standby mode and is set to higher consumption.
●
This function works when Power off Link is set to On.