Operating Instructions

- 160 -
Intelligent Auto Standby
Set Intelligent Auto Standby to On in the Setup Menu to use this function.
Settings Setup VIERA Link Settings
When the TV is on, non-used connected equipment goes into Standby mode
automatically to reduce the power consumption. For example, when the input
mode is switched from HDMI or when Speaker Selection is changed to TV
(except for watching a disc).
●
This function may not work properly depending on the connected
equipment. In this case, set to Off.
VIERA Link Control
You can control some functions of the connected equipment with this TV’s
remote control by pointing at the TV’s signal receiver.
1. Display APPS List with APPS
2. Select VIERA Link with
/ / / and press OK to access
3. Select VIERA Link Control with
/ and press OK to access
4. Select one of the following items with
/ and press OK to access
Recorder / Player / Home Cinema / Video Camera / LUMIX / Digital
Camera / Other
(The menu of the accessed equipment will be displayed. The input mode
will be changed automatically.)
●
The displayed item may vary depending on the connected equipment.
●
Home Cinema means Player theatre, Blu-ray Disc theatre or Recorder
theatre.
●
Other means Tuner set top box.
5. Follow the on-screen instructions to operate the menu of the equipment
●
Confirm the remote control code is “73”.
Watching External equipment Operating with TV’s remote control
●
To display the operation guide
OPTION
(If other manufacturers’ product is accessed, Setup / Contents
Selection menu may be displayed.)
●
Available TV’s remote control buttons depend on the connected
equipment.