Operating Instructions

English
5
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury
may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified
procedure.
(see below)
Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
Assembly screw (4)
M5 × 15
Assembly screw (4)
M4 × 25
Bracket
TBL5ZA32911 (TX-L32ET5Y)
TBL5ZA32831 (TX-L37ET5Y)
TBL5ZA32921
TX-L42ET5Y
TX-L47ET5Y
TX-L55ET5Y
()
Base
TBL5ZX03551 (TX-L32ET5Y)
TBL5ZX03541 (TX-L37ET5Y)
TBL5ZX03531 (TX-L42ET5Y)
TBL5ZX03511 (TX-L47ET5Y)
TBL5ZX03851 (TX-L55ET5Y)
1
Assembling the pedestal
Use the assembly screws to fasten the bracket
to the base securely.
Make sure that the screws are securely
tightened.
Forcing the assembly screws the wrong way
will strip the threads.
D
C
A
Front
2
Securing the TV
Use the assembly screws to fasten securely.
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
Carry out the work on a horizontal and level surface.
B
Arrow mark
Hole for pedestal
installation
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1 Remove the assembly screws
from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screws from the bracket.
Adjusting the panel to your desired angle
Do not place any objects within the full rotation range.
15°
15°
(View from the top)
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
The place where the pedestal is to be fixed should be thick enough and made of hard material.
Screw (not supplied)
Diametre
55 inches model: 4 mm
Other inches model: 3 mm
Length: 25 - 30 mm
Screw hole