Operating Instructions

66
Message Meaning / Action
All tuning data will be erased “Shipping Condition” will erase all tuning data (p. 41).●
Are you sure ? Confirm correct operation.●
Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return
Confirm correct operation.●
Bad signal
The signal is weak. Check the aerial is plugged in properly. It may ●
be necessary to have an aerial installer check the signal and aerial
alignment.
Reset channels. (p. 34 and p. 35)
●
Child Lock is active !
Press OK to enter PIN.
The selected channel is locked in Child Lock (p. 40). You must enter the ●
PIN number before the channel will be displayed.
Feature not available
It is not possible to record from COMPONENT or HDMI. Connect the ●
recorder to the TV using a fully wired SCART cable for recording from the
TV tuner.
Confirm Q-Link or VIERA Link settings (p. 50 - 53).
●
Found new software version
∗∗∗
.
Press OK to start update
(may take 40 mins)
or Press EXIT to ignore
and you can update when TV is in
standby.
There is a new software available.●
Invalid operation - Please check settings
and connections.
Check the Q-Link or VIERA Link connection and setting (p. 50 - 53).●
Invalid system time. Please exit ! Cannot get the time information. Check the connection of the RF cable.●
Max. number of Timers already set ! The maximum number of timer programming events is 15.●
New channels found!
Press OK to update channel list
Press EXIT to ignore.
There may be new channels available.●
This message will appear each time a change is made by the ●
broadcasters. This message can be deactivated by setting “New Channel
Message” to Off in “DVB Tuning Menu”.
Selecting OK will perform “Update Channel List”.
No channel found.
Please check aerial or local signal
availability.
Press OK to start Auto Setup.
Please follow the message.●
If it is still failed, consult your local Panasonic dealer.
On screen messages