Operating Instructions

On screen messages ●
FAQs, etc.
67
Message Meaning / Action
No module inserted Check the CI module inserted completely (p. 45).●
No recording - Check media The tape or disc may be “write protected”, missing or damaged.●
No recording - Already recording The equipment may already be recording. ●
No recording - Unknown reason
The recording may not be performed. Check the equipment.●
Disc or tape may be full.●
No service
The broadcaster has stopped the service. Check the channel in TV ●
Guide. (p. 18)
No signal The TV cannot detect the signal. Check the connection of the RF cable.●
PIN incorrect! The PIN number you entered is wrong.●
Please check settings and connections
on HDMI devices.
Communication error in VIERA Link function (p. 53).●
Please wait. A function is in progress.●
Recording this channel now
The recorder is recording the programme from its own tuner. You can turn ●
the TV off and leave the equipment recording in the normal way.
Reset to Factory Shipping Condition
Completed.
Please switch off TV.
“Auto Setup” will automatically start when Mains power On / Off switch is ●
next turned On. (p. 12)
Sending Preset Data
Please wait!
Q-Link or VIERA Link channel download is in progress.●
Software successfully updated.
Press EXIT to continue.
The software updating is finished.●
Software update failed. Please try again
later.
Press EXIT to continue.
Perform “System Update Search Now” in System Update (p. 45).●
If this is still unsuccessful, there may not be any new software available.