Operating Instructions

How to Use Menu Functions ● (picture, sound quality, etc.)
Viewing
31
Menu list ■
Menu Item Adjustments / Configurations (alternatives)
Sound
Mode
Select two different sound settings (Music / Speech)
In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit your
particular sound requirement
Changes to any settings in a mode will affect all signal sources
●
Sound quality can be improved ●
Bass
Increases or decreases level to enhance or minimise lower, deeper sound output
Treble
Increases or decreases level to enhance or minimise sharper, higher sound output
Balance
Adjusts volume level of right and left speakers
Headphone Volume
Adjusts the volume of the headphones
Surround
Surround sound settings (Off / V-Audio / V-Audio Surround)
V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effects
V-Audio Surround: Provides a dynamic enhancer of width and depth to simulate
improved spatial effects
Switching is also possible by the Surround button on the remote control (p. 9).
●
Volume Correction
Adjusts the volume of individual channel or input mode
Speaker Distance to
Wall
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
If the back space between the TV and wall is over 30 cm, “Over 30cm” is
●
recommended.
If the back space between the TV and wall is within 30 cm, “Up to 30cm” is ●
recommended.
Preferred Multi Audio
Selects the preferred language for DVB channel multi audio (depending on the
broadcaster)
NICAM
NICAM (Near Instantaneous Companded Audio Multiplex)
A format for digital sound over television
Reproduces stereo sound (Off / On)
Off if reception is poor (FM monaural sound)
●
Analogue mode only ●
HDMI1 / 3 Input
Select to fit the input signal (Digital / Analogue) (p. 63)
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
HDMI input mode only
●
HDMI2 terminal is for digital signal only ●
No setting for HDMI2 available ●
Audio Description Menu
Audio Description
Useful for visually-impaired viewers(Off / Auto)
Set to “Auto” to activate the description sound track if available
The availability of audio description sound track is indicated by “AD” in the information
●
banner (p. 16).
DVB mode only
●
Volume
Adjusts the volume for Audio Description
DVB mode only
●
Speakers
Set to “On” to activate the description sound track from TV speakers (Off / On)
DVB mode only
●
Headphones
Set to “On” to activate the description sound track from headphones (Off / On)
DVB mode only
●
Reset to Defaults
Press the OK button to reset the present Sound Mode to the default settings
Effective to Bass, Treble, Balance, Headphone Volume and Surround
●
A different menu will be displayed while PC or SD Card is used. (p. 49 and p. 51) ●
Only available items can be selected. ●