Operating Instructions
DIRECT TV REC
ASPECT
OPTION
RETURN
TEXT
PROGRAMME
STTL
INDEX HOLD
N
AV
EXIT
MENU
INPUT
TV
46
Recording Controls
Timer Programming from Menu
The Timer programming menu allows you to choose programmes that you wish to record. At the correct
time, the TV will switch on and tune to the correct channel (even if the TV is in Standby mode).
TV Guide may also be used to set timer programming. (p. 19)
If the recorder is compatible with Q-Link or similar technologies (p. 54), and setup / connection are done ●
completely (p. 52 and p. 54), you do not need to programme the recorder – the TV will control the recording
progress.
If the recorder is not compatible with Q-Link or similar technologies, set “Q-Link” in the Setup Menu (p. 32) to ●
the connected terminal (AV1 or AV2), and make timer programming of the recorder (Read the manual of the
recorder).
Recording is possible in composite video via SCART only - including HD content. ●
While recording, you cannot watch any other channels except the one being recorded. ●
1
Select the mode you want to set a recording
TV
2
Display the menu
MENU
3
Select “Setup”
Main Menu
Picture
Sound
Setup
access
select
4
Select “Timer Programming”
Setup Menu
Timer Programming
Access
Display Settings
Link Settings
Child Lock
DVB Tuning Menu
System Menu
OffOff Timer
Other Settings
access
select
5
Set
To return to TV ■
EXIT
To stop ■
recording
EXIT
Caution
The TV must either be On or in standby. ●
For preparations of a recorder, read the manual of the recorder. ●
No other channel can be selected during recording. ●
It may not be possible to record an encrypted programme (which is copy-protected). ●