Operating Instructions

Using Network Services
77
■ [WPS(Push button)]
1) Please press the ‘WPS’ button on the access
point until its light ashes.
2) When the light is ashing select ‘Connect’ on
TV.
If you are unsure, please check the instruction
manual of the access point.
WPS(Push button)
C onnect
press the WPS button on the access point until the light flashes
connect the Wireless LAN Adaptor and the access point
•
E nsure that your access point supports WPS for this setup.
•
WPS : Wi-Fi Protected Setup™
■ [WPS(PIN)]
1 Select your desired access point
1
2
3
Access Point A
SSID
Access Point B
Access Point C
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
Available Access Points
N o. Wireless type E ncrypt R eception
access
select
•
E nsure that your access point supports WPS for this setup.
•
T o search access points again
(yellow)
•
F or the information of the highlighted access point
•
T o set manually
(red)
2 Enter the PIN code to the access point, and then select [Connect]
Please register the following PIN codes on the
access point.
PIN code : 12345678
Select ‘Connect’ after entering and saving the
settings on the access point.
WPS(PIN)
C onnect
■ [Search for access point]
Access points found automatically are listed.
1 Select your desired access point
1
2
3
Access Point A
SSID
Access Point B
Access Point C
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
Available Access Points
N o. Wireless type E ncrypt R eception
access
select
: Encrypted access point
•
T o search access points again
(yellow)
•
F or the information of the highlighted
access point
•
T o set manually
(red)
2 Access the encryption key input mode
SSID : Access Point A
Encryption Key Setting
E ncryption key
C onnection will be made with the following settings:-
Authentication type : WPA- PSK
E ncryption type : TKIP
Please input the encryption key.
•
If the selected access point is not encrypted, the confirmation screen will be
displayed. It is recommended to select the encrypted access point.