Operating Instructions
Link Functions (Q-Link / VIERALink)
88
Speaker control [Speaker Selection]
Y ou can control the theatre speaker with this TV remote control (point the remote control at the TV’s signal receiver).
•
If you cannot operate, check the settings and the equipment
“Summary of Q-Link and VIERA Link features” (p.80,81), “Preparations” (p.83)
1
Display [VIERA Link Menu]
2
Select [Speaker Selection]
VIERA Link Menu
P ause Live TV
D irect TV Rec
VIERA Link Control
Speaker Selection
Start
H ome Cinema
R ecorder
Start
access
select
3
Set to [Home Cinema] or [TV]
store
select
[Home Cinema]
Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned on if it is in
Standby mode and the sound is from theatre speakers connected to the equipment.
•
V olume up / down
•
Mute
•
T he sound of TV speakers is mute.
•
When the equipment is turned off, TV speakers will be active.
[TV]
TV speakers are active.
Multi-channel sound
If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect
with HDMI cable and Optical digital audio cable (p.81), and then select [Home Cinema]. If your
Amplifier has “HDAVIControl 5” function, you can connect only with HDMI cable. In this case,
connect your Amplifier to the TV’s HDMI2 terminal.
T o enjoy the sound from the DIGA Recorder in multi-channel sound, connect an HDMI cable from
the DIGA Recorder to the Amplifier (p.81).
Note
•
T hese functions may not work properly depending on the connected equipment.
•
Image or sound may not be available for the first few seconds when input mode is switched.
•
E asy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier. Read the
manual of the equipment.
•
“HDAVI Control 5” is the newest standard (current as of December, 2010) for HDAVI Control compatible equipment. This
standard is compatible with conventional HDAVI equipment.
•
T o confirm this TV’s version of HDAVI Control [System Information] (p.44)