Model No. TX-P42UX30E Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.
Experience an amazing level of multimedia excitement Enjoy rich multimedia SD Card VCR Camcorder Amplifier with Speaker system Set top box DVD Recorder DVD Player Blu-ray Disc Player Notice for DVB functions This TV is designed to meet the standards (as of August, 2009) of DVB-T (MPEG2 and MPEG4-AVC(H.264)) digital terrestrial services and DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital cable services. Consult your local dealer for availability of DVB-T services in your area.
Do not display a still picture for a long time This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty.
Safety Precautions Warning Safety Precautions Handling the mains plug and lead the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.) • Insert that the mains plug is easily accessible. • Ensure the earth pin on the mains plug is securely connected to prevent electrical shock. • Ensure • An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.
Caution Do not block the rear air vents When the TV is not going to be used for a long period of time, remove the mains plug Do not expose your ears to excessive volume from the headphones Blocked ventilation by newspapers, table cloths, curtains, • etc. may cause overheating, fire or electrical shock. • Cleaning an energized TV may cause electrical shock. TV will still consume some power even in the Off mode, • Irreversible damage can be caused.
Accessories / Options Standard accessories Remote Control N2QAYB000487 Batteries for the Remote Control (2) R6 (see below) • TV abc Mains Lead (p. 11) • AV Pedestal (p. 7) def ghi jkl mno pqrs tuv wxyz Quick Start Guide TV Operating Instructions Pan European Guarantee Card may not be placed all together. Take care not to throw them away unintentionally.
Attaching / removing the pedestal Warning Do not disassemble or modify the pedestal. Otherwise the TV may fall over and become damaged, and personal injury may result. • Caution • • • • • A Assembly screw (4) (silver) M5 × 20 1 • D Base TBL5ZX0030 • M5 × 25 Assembling the pedestal Use the assembly screws A to fasten the pole C to the base D securely. Make sure that the screws are securely tightened. Forcing the assembly screws the wrong way will strip the threads.
Identifying Controls Remote Control 8 OK Quick Start Guide 1 2 3 4 5 6 7 15 16 17 18 19 8 20 21 9 22 Identifying Controls 10 11 23 24 selections and choices • Confirms after selecting channel positions to quickly • Press change channel • Displays the Channel List 9 [Option Menu] (p. 16) • Easy optional setting for viewing, sound, etc. 10 Teletext (p. 21) • Switches to teletext mode 11 Subtitles (p.
TV 4 5 6 7 2 3 1 4 SD Card slot (p. 49) Headphones jack (p. 67) Mains power On / Off switch Use to switch the mains power. If you turned the TV Off during Standby mode by the remote control last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch. • 8 Remote control signal receiver not place any objects between the TV remote • Do control signal receiver and remote control. 6 8 9 10 9 C.A.T.S.
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
Example 3 Connecting DVD Recorder / VCR and Set top box TV, DVD Recorder / VCR and Set top box Mains Lead Rear of the TV Push until both side tabs click AC 220-240 V 50 / 60 Hz To remove from the TV : Basic Connection tabs Press both tabs and pull on mains connector to release Mains lead (supplied) Quick Start Guide Make sure that the mains lead is securely fixed.
Auto Setup Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 10, 11) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
5 2 [DVB-C Auto Setup] 3 [DVB-T Auto Setup] DVB-T Auto Setup DVB-C Auto Setup Progress 0% Free TV: 3 Progress 100% This will take about 3 minutes. No. Channel Name 1 CBBC Channel 2 BBC Radio Wales E4 3 Type Free TV Free TV Free TV Pay TV: 0 Searching CH 5 This will take about 3 minutes.
Watching TV SD CARD INPUT TV AV MENU ASPECT 1 Turn power on 2 Select the mode for about 1 second • Press • Mains power On / Off switch should be On. (p. 9) N DIRECT TV REC EXIT selectable modes vary depending on the • The stored channels (p. 12).
Other useful functions Display Information banner Display Information banner Also appears when changing a channel • 1 7 1 ZDF 5 6 1 2 3 4 2 3 Radio 20:35 4 Example : DVB Coronation Street 20:00 - 20:55 Encrypted Now Dolby D+ Channel position and name Channel type ([Radio], [Data], [HDTV], etc.) All DVB-T Channels Change category For info press 45 5 Programme 6 Programme Start / Finish time (DVB) Channel number, etc.
Hold Freeze / unfreeze picture HOLD Display the selectable settings for the current status Check or change the current status instantly To change OPTION • select change [Multi Video] (DVB mode) Allows you to select the image (if available) This setting is not memorized and it will return to the default setting once you exit the current programme.
Aspect Change the aspect ratio (image size) Enjoy viewing the image at its optimum size and aspect. ASPECT Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 68).
Using TV Guide TV Guide - Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). This function varies depending on the country you select (p. 12). The postcode entry or update may be required to use the GUIDE Plus+ system depending on the country you select. “View advertisement” (p. 19) DVB-T and Analogue channels are displayed on the same TV Guide screen.
■ To the previous day (DVB mode) ■ To the next day (DVB mode) (red) (green) ■ To view a channel list of the selected type ■ To view a channel list of the selected category (DVB mode) (blue) (yellow) (Category list) (Type list) Prog.Type All Types Categor y All Channels select type view view All Channels All DVB -T Channels All Analogue Channels All Types Movie News select category Only Analogue channels are listed Free T V Pay T V . . . . . .
Timer Programming (DVB mode) Timer Programming is a timer to remind watching or record the programme to the external recorder. 1 Select the forthcoming programme 2 Select the function ([Ext Rec.] or [Reminder]) select (Timer Programming screen) Timer Programming Function set D Ext Rec. select Wed 27.10.2010 10:46 No. Channel Name Date 1 BBC ONE Start End Wed 27.10.2010 20:00 20:30 (30 min.) --- --- --/-- --:-- --- --- --/-- --:-- store --:-- (--- min.) --:-- (--- min.
Viewing Teletext Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FLOF (FASTEXT) mode? In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.
FULL / TOP / BOTTOM MENU (green) (TOP) (BOTTOM) Normal (FULL) (Expand the TOP half ) (Expand the BOTTOM half ) View in multi window Watch TV and Teletext in two windows at once MENU Select Picture and text On or Off (Press twice) • Operations can be made only in teletext screen. Viewing Teletext Store frequently viewed pages Store frequently viewed pages in the colour bar (List mode only) As page is displayed press and hold (Corresponding coloured button) The number changes to white.
Watching External Inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input. To connect the equipment (p. 10, 11, 66, 67) The remote control is capable of operating some functions of selected external equipment. “Operating the equipment with the TV remote control” (p. 24) • SD CARD INPUT TV AV MENU ASPECT 1 Turn the TV on N DIRECT TV REC When connecting with SCART as example 2 or 3 (p.
Operating the equipment with the TV remote control The Panasonic equipment connected to the TV can be directly operated with the below buttons of this TV remote control.
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. SD CARD INPUT TV AV MENU ASPECT 1 Display icons of the feature 2 Select a feature TO VIERA OLS N DIRECT TV REC EXIT select access OPTION RETURN TEXT STTL INDEX HOLD VIERA Link Control def jkl mno pqrs tuv wxyz LAST VIEW 3 Follow the operations of each feature [VIERA Link Control] “VIERA Link Control” (p.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions.
Menu list Menu Item Adjustments / Configurations (alternatives) Basic picture mode [Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game] In each Viewing Mode and input, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [Eco Mode], [P-NR] and [3D-COMB] can be adjusted and stored to suit your particular viewing requirement. Set for each input signal. [Dynamic] : Provides enhanced picture contrast and sharpness when viewing in a bright room.
Menu Adjustments / Configurations (alternatives) Item Advanced Settings Picture How to Use Menu Functions Refresh Rate Changes the image processing of the panel (depending on the input signal) [50Hz] / [100Hz] Set to [100Hz] normally Resolution Enhancer Enhances the picture resolution to make the image sharper [Off] / [Mid] / [Max] This function is available for SD (Standard definition) signal.
Menu Item Adjustments / Configurations (alternatives) Balance Adjusts volume level of right and left speakers Headphone Volume Adjusts the volume of the headphones Surround Surround sound settings [Off] / [V-Audio] / [V-Audio Surround] [V-Audio] : Provides a dynamic enhancer of width to simulate improved spatial effects [V-Audio Surround] : Provides a dynamic enhancer of width and depth to simulate improved spatial effects Auto Gain Control Adjusts the current volume level if it is extremely diffe
Menu Item Sound How to Use Menu Functions PCM Optical Level HDMI1 / 2 Input Select to fit the input signal [Digital] / [Analogue] (p.
Menu Item Adjustments / Configurations (alternatives) DVB-C Tuning Menu Favourites Edit Creates list of favourite DVB-C channels (p. 36) Channel List Skips the unwanted DVB-C channels or edits DVB-C channels (p. 37) Auto Setup Automatically sets the DVB-C channels supplied (p. 34) Manual Tuning Sets the DVB-C channels manually (p. 38) Update Channel List Updates DVB-C Channel List while keeping your settings (p.
Menu Item Analogue Tuning Menu Language Skips the unwanted Analogue channels or edits Analogue channels (p. 39) Auto Setup Automatically sets the Analogue channels received in the area (p. 35) Manual Tuning Sets the Analogue channels manually (p. 40) Add TV Signal Adds the TV mode This function is available if you skip any modes to tune in [Auto Setup] for first using the TV. To operate, refer to the “Auto Setup” operations for first using the TV (p. 12, 13).
Menu Item Common Interface Adjustments / Configurations (alternatives) Uses include to watch encrypted channels (p. 46) System Menu Shipping Condition Resets all settings, for example, when moving house (p. 47) System Update Downloads new software to this TV (p.
Retuning from Setup Menu Automatically retune the channels received in the area. This function is available if channel tuning is already performed. Only the selected mode is retuned. All the previous tuning settings are erased. If Child Lock PIN number (p. 44) has been set, the PIN number is required. If tuning has not been done completely [Manual Tuning] (p. 38, 40) • • • • • DVB-C channels SD CARD INPUT TV AV MENU ASPECT 1 Select DVB-C (p.
DVB-T or Analogue channels SD CARD INPUT TV AV MENU ASPECT 1 EXIT RETURN (p.
Tuning and Editing Channels (DVB) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. 1 INPUT TV AV SD CARD MENU ASPECT Select DVB-C or DVB-T (p.
2 Add it to the Favourites list DVB-C Favourites Editor 1 7 14 70 72 105 719 720 All DVB-C Channels BBC One Wales BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru • To add continuous block of channels to the list at once Sorting 123...
Set DVB channel manually [Manual Tuning] Normally use [Auto Setup] or [Update Channel List] to retune DVB channels. If tuning has not been done completely or for adjusting the direction of the aerial, use this function. All channels found will be added to the Channel List. • DVB-C : 1 Enter the frequency 2 Search DVB-C Manual Tuning Frequency Symbol Rate Service ID Signal Quality Signal Strength No.
Tuning and Editing Channels (Analogue) You can retune channels or skip unwanted channels, edit channels etc. INPUT TV AV SD CARD MENU ASPECT 1 Select Analogue (p.
■ To edit channels You can also edit each channel in Channel List. To retune each channel ([Manual Tuning]) • • (red) (see below) To move the channel position Select the new position Store (green) (green) • To rename the channel name Set characters (maximum : five characters) Store RETURN select Edit channel name (blue) Name A U a u B C D V W X b c d v w x E Y e y F G H I Z 0 1 f g h i z ( ) + J 2 j - K 3 k .
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. 20). This function is not available in Analogue mode. Timer Programming can store up to 15 events.
Set timer programming event details [Timer Programming] 1 Start making the settings 2 Select the function ([Ext Rec.] or [Reminder]) select [Ext Rec.] : to record the programme to the external recorder When the start time comes, the channel will be switched automatically and the video and audio signals will be output. 2 minutes before the starting time, a reminder message appears if you are watching TV.
■ To change a timer programming event ■ To record with subtitles (if available) Select the programme to be changed Select the programme to record with subtitles select (yellow) Correct as necessary (p. 42) • Each time pressed : access auto ■ To cancel a timer programming event off ■ To cancel a timer programming event Select the programme to be deleted temporarily Select the programme to be cancelled (red) (blue) • Each time pressed : cancel stop cancelling Note that the LED is orange.
Control channel audience [Child Lock] 1 Enter the PIN number (4 digits) Child Lock-PIN Entry Please enter new PIN PIN abc * * * * def ghi jkl mno pqrs tuv wxyz the PIN number twice at first setting. • Enter a note of the PIN number in case you forget it. • Make may be stored as the default PIN number which depends on • “0000” the country you select (p. 12).
Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminal that is not connected to any equipment. To select the input mode (p.
Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This function may not be available in some countries or regions. Video and audio signals may not be output depending on broadcasts or services. Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. pay-TV). Please use only the approved CI module by the broadcaster.
Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings are reset (channels, picture, sound settings, etc.). To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p.
Updating the TV Software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. If there is an update available, a notification banner is displayed when the channel has the update information. • To download • If you choose not to download EXIT You can update any new software automatically or update manually.
Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card. VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot. Photo mode : Still pictures recorded by digital cameras will be displayed. Video mode : Moving pictures recorded by digital video cameras will be played back. Music mode : Digital music data will be played back.
Photo mode Photo mode will read all “.jpg” extension files in the SD Card. The thumbnail of all the photos in the SD Card will be displayed. Example : Thumbnail - [All photos] INPUT TV AV SD CARD MENU ASPECT N DIRECT TV REC All photos Media Player Photo View Select Slideshow EXIT RETURN View Select EXIT OPTION RETURN TEXT STTL INDEX HOLD or SD Card Info Option Menu Contents Select : Error display the back ground music “Photo Settings” (p.
[Single view] - Photos are displayed one at a time.
Menu Item Adjustments / Configurations (alternatives) Colour Effect Selects the colour effect of photos on Single view and Slideshow [Off] / [Sepia] / [Gray scale] This function is not available when [Frame] is set to [Drift], [Gallery] or [Cinema]. Transition Effect Selects the transition effect for switching the photo during the slideshow [Off] / [Fade] / [Slide] / [Dissolve] / [Motion] / [Random] [Fade] : The next photo fades in gradually.
Change the contents You can switch to the other mode of Media Player from the thumbnail view. 1 While the thumbnail is displayed, 2 Select the contents display the contents selection Media Player All photos Photo select access (blue) Contents Select EXIT Select RETURN View Access Select SD Card Slideshow EXIT Photo RETURN View Select OPTION SD Card Music Video Info [Photo] [Video] [Music] “Photo mode” (p. 50) “Video mode” (p. 53) “Music mode” (p.
■ How to operate in the playback Example : Playback SD 19/02/2010 11:21 00:15:39 00:02:05 display / hide the operation guide and • Toinformation banner • To change aspect ASPECT the previous title / • Toscene • To operate the playback Rewind EXIT RETURN (red) Pause / Playback Operation guide • To the next title / scene Fast forward Information banner (green) Stop • To return to thumbnail can also use the following buttons. • You Set the code of the remote control to “73” (p.
Audio output Settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT terminal. To confirm or change the current sound status “Confirm or change the current status” (p.
■ Playback from File view Selected file will be played back.
Link Functions (Q-Link / VIERA Link) Q-Link connects the TV and DVD Recorder / VCR, and enables easy recording, playback, etc. (p. 59) VIERA Link (HDAVI Control™) connects the TV and the equipment with VIERA Link function, and enables easy control, convenient recording, playback, energy saving, creating home theatre, etc., without complicated setting. (p. 60 - 65) You can use Q-Link and VIERA Link functions together. This TV supports “HDAVI Control 5” function.
VIERA Link (HDMI and Audio out connections) Connected equipment Features Preset download Easy playback Power on link Power off link Reduce unnecessary power consumption in standby Auto standby for unnecessary equipment Pause Live TV programme Direct TV Recording Control the menu of the connected equipment by VIERA remote control Speaker control Player theatre with VIERA Link function – ∗6 Blu-ray Disc theatre with VIERA Link function – ∗6 Amplifier with VIERA Link function – – – ∗3 – ∗3 ∗7 – ∗3 ∗7 –
Q-Link Preparations the DVD Recorder / VCR with the following logos : • Connect “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”, “Megalogic (a trademark of Grundig Corporation)”, “SMARTLINK (a trademark of Sony Corporation)” connection (p. 57) • Q-Link fully wired SCART cable. • Use up the DVD Recorder / VCR. Read the manual of the recorder. • Set terminal setup in the Setup Menu [AV1 out] (p.
VIERA Link “ Control™”∗ ∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 57, 58). These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
Reduce unnecessary power consumption in standby [Standby Power Save] Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 30) The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronization with the TV On / Off state to reduce the consumption.
Pause Live TV programme [Pause Live TV] You can pause the live TV programme and resume later. Live TV programme will be recorded on HDD of the connected DIGA Recorder. This function is available with DIGA Recorder which has HDD. If you connect a variety of recorders including other manufacturers’ recorders at the same time, please connect DIGA Recorder which has HDD to the TV’s lower HDMI terminal number.
Control the menu of the connected equipment by VIERA remote control [VIERA Link Control] You can control some functions of the connected equipment with this TV remote control (point the remote control at the TV’s signal receiver). If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features” (p. 57, 58), “Preparations” (p. 60) For details of the operations for the connected equipment, read the manual of the equipment.
4 Operate the menu of the equipment Available VIERA remote control buttons : (Depending on the connected equipment) SD CARD INPUT TV AV MENU ASPECT N DIRECT TV REC EXIT 1 Set the code of the remote control to “73” “How to change the code for the type of the equipment” (p.
Speaker control [Speaker Selection] You can control the theatre speaker with this TV remote control (point the remote control at the TV’s signal receiver). If you cannot operate, check the settings and the equipment “Summary of Q-Link and VIERA Link features” (p. 57, 58), “Preparations” (p.
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the table below, and the specifications (p. 74, 75).
To watch DVDs (Listening) DVD Player (Viewing) HDMI equipment Recorder / Player Fully wired HDMI compliant cable • HDMI connection Camcorder (p. 70) Camcorder / Game equipment (Viewing) Camcorder (Listening) Game equipment External Equipment To listen with speakers Optical digital audio cable or RCA cable Amplifier with speaker system To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier.
Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 17) Aspect Control Signal [WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found. The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio. This function will work in any aspect mode.
Media Player SD Card Card format : SDXC Card - exFAT SDHC Card / SD Card - FAT16 or FAT32 Compliant card type (maximum capacity) : SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB), miniSD Card (2 GB) (requiring miniSD adaptor) If miniSD Card is used, insert / remove it together with the adaptor. 2.1 mm Check the latest information on the card type at the following website. (English only) http://panasonic.jp/support/global/cs/tv/ Use an SD Card which meets SD standards.
Characters table for numeric buttons You can enter characters by using numeric buttons for free input items. Press the numeric button repeatedly until you reach the User input desired character. abc Name A U a u B C D V W X b c d v w x E Y e y F G H I Z 0 1 f g h i z ( ) + J 2 j - K 3 k . L M N O P Q R 4 5 6 7 8 9 ! l m n o p q r * _ S : s T # t def ghi jkl mno pqrs tuv wxyz character is set automatically if you leave for 1 second.
Input signal that can be displayed COMPONENT (Y, PB, PR), HDMI Signal name 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1,125 (1,080) / 60i, 50i 1,125 (1,080) / 60p, 50p, 24p COMPONENT HDMI Mark : Applicable input signal PC (from HDMI terminal) Signal name 640 × 480 @60 Hz 750 (720) / 60p 1,125 (1,080) / 60p Horizontal frequency (kHz) 31.47 45.00 67.50 Vertical frequency (Hz) 60.00 60.00 60.00 Applicable input signal for PC is basically compatible to HDMI standard timing.
FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting) occurs in Analogue mode / Some channels cannot be tuned Check the position, direction and connection of the aerial. Check [Signal Condition] (p. 38). If [Signal Quality] is displayed in red, the DVB signal is weak.
Problem Chaotic image, noisy Screen No image can be displayed Blurry or distorted image (no sound or low volume) Unusual image is displayed Sound No sound is produced Sound level is low or sound is distorted Sound is unusual HDMI Pictures from external equipment are unusual when the equipment is connected via HDMI The TV does not switch On The TV goes into Standby mode The remote control does not work or is intermittent Actions [P-NR] in the Picture Menu (to remove noise). (p.
Specifications Power Source AC 220-240 V, 50 / 60 Hz Rated Power Consumption 255 W On mode Average Power Consumption (based on IEC 62087 Ed.2 measurement method) 115 W Standby Power Consumption 15.00 W (With monitor out recording) Dimensions (W × H × D) 1,023 mm × 671 mm × 288 mm (With Pedestal) 1,023 mm × 637 mm × 93 mm (TV only) Mass 26.5 k Net (With Pedestal) 23.
AV1 (SCART) AV2 input 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) Connection Terminals VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ω) AUDIO L - R RCA PIN Type × 2 0.5 V[rms] COMPONENT input Y PB, PR 1.0 V[p-p] (including synchronization) ±0.35 V[p-p] HDMI 1 / 2 input TYPE A Connectors HDMI1 : HDMI (Version 1.3 with Deep Colour, x.v.Colour™) HDMI2 : HDMI (Version 1.4 with Audio Return Channel), Deep Colour, x.v.Colour™ This TV supports “HDAVI Control 5” function.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.