Operating instructions
Using TV Guide
20
Timer Programming (DVB mode)
T imer Programming is a timer to remind watching or record the programme to the external recorder.
1 Select the forthcoming programme
2 Select the function ([Ext Rec.] or [Reminder])
select
set
09
-- - --/-- --:-- --:--
--/-- --:-- --:--
-- - --/-- --:-- --:--
-- - --/-- --:-- --:--
--/-- --:-- --:-----
---
---
---
---
Timer Programming
Function No. Channel Name Date Start End
Wed 27.10.2010 10:46
I nfo
EXIT
Select timer
RETURN
D elete
Edit timer
P age up
1 /1
P age down
BBC ONE Ext Rec. Wed 27.10.2010 20:00
(30 min.)
(--- min.)
(--- min.)
(--- min.)
(--- min.)
20:30 D 1
<TIMER>
(Timer Programming screen)
store
select
LED will turn to orange if
TimerProgramming is set.
(Orange LED will flash if the recording of
Timer Programming is in progress.)
LED
[Ext Rec.] :
to record the programme to the external recorder
When the start time comes, the channel will be switched automatically and the
video and audio signals will be output. 2 minutes before the starting time, a
reminder message appears if you are wat ching TV.
[Reminder] :
to remind watching the programme
When you are watching TV, a reminder message appears 2 minute
s before the
start time. Press the OK button to switch to the programmed channel.
■ To check / change / cancel a timer
programming event
■ To return to TV Guide
RETURN
“Timer Programming” (p.41 - 43)
■ If you select the current programme
A confirmation screen whether you wish to watch or record it will appear.
Select [Timer Programming] and set [Ext Rec.] to record from the time you finish the timer programming event setting.
D as Erste
19:30- 20:00
V iew T imer P
rogramming
access
select
Note
•
T his function is not available in Analogue mode.
•
T imer Programming only works reliably if correct time information is received via the signal from the broadcaster or service
provider.
•
N o other channel can be selected while the recording of Timer Programming is in progress.
•
When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the
TV.
If a compatible recorder with Q-Link, VIERALink or similar technologies is connected to the TV (p.59, 60) and the [Link
Settings] (p.30) are completed, no setting of the recorder is required. Also read the manual of the recorder.