Operating Instructions

20
●
Set where the level of [Signal Quality] becomes the
maximum.
2 Search
Analogue:
■
Fine Tuning
Use to make small adjustments to the tuning of an
individual programme (affected by weather conditions,
etc.).
1 Select the channel position
●
If a VCR is connected only with the RF
cable, select channel position [0].
2 Select the channel
3 Search
4 Select [Store]
Update Channel List
You can add new channels, delete removed channels,
update channel name and position automatically to the
channel list.
●
The channel list is updated while keeping your settings
in [Favourites Edit], [Channel List], [Child Lock], etc.
●
Depending on the signal condition, the update may not
work properly.
Child L ock
You can lock specific channels / AV input terminals and
control who watches them.
When the locked channel / input is selected, a message
appears. Enter the PIN number to watch.
[Setup] [Child Lock]
1 Enter the PIN number (4 digits)
●
Enter the PIN number twice at first setting.
●
Make a note of the PIN number in case you forget it.
2 Select [Child Lock List] and set the channel / input
to be locked
101 BBC 1 Wales
7 BBC THREE
14 E4C
VCR
1 BBC1
*****2
HDMI1 AV
Child Lock List - TV and AV
Name Input
DVB
DVB
DVB
Analogue
Analogue
Analogue
External
Type
Free TV
Free TV
Free TV
Analogue
Analogue
Analogue
Lock
: Appears when the channel / input is locked
To edit the list by using the coloured buttons
■
Lock all: Locks all channels and input.
■
Unlock all: Cancels all locks.
■
Next input: Jumps to the top of the next input.
■ To change the PIN number
Select [Change PIN] and enter a new PIN number twice
■ Freeview Players
Applies access control for some MHEG services.
■ To set Parental Rating
To watch the DVB programme that has the rating
information over the selected age, enter the PIN number
to watch (depending on the broadcaster).
Select [Parental Rating] and set an age for the restriction
of programmes.
Note
●
Setting [Shipping Condition] (p. 18) erases the PIN
number and all settings.
Updating the TV
Software
A new version of software may be released for download
to enhance the performance or operations of the TV.
●
Download may take a few hours.
●
During software download and update, DO NOT switch
off the TV.
Update from Broadcasting
If there is an update available, a notification message is
displayed when the channel has the update information.
●
To update in next Standby mode, select [Standby].
To update immediately, select [Now].
(Select [Ignore] not to update.)
You can search new software automatically or update
manually.
[Setup] [System Menu] [System Update]
■ To search an update automatically
Select [Auto Update Search in Standby] and set to [On]
Auto Update Search in Standby
System Update Search Now
System Update
Off
●
The TV automatically performs a search an update in
Standby mode (TV turned off with the remote control).
If there is an update available, a notification message
will be displayed when the TV is next turned on.
■ To update immediately
1 Select [System Update Search Now]
2 Searches for an update (for several minutes) and
displays a corresponding message if any
3 Download